lift kit

Post by **woznme** » Mon Feb 16, 2009 9:31 pm

ok i'm looking at ARB, TJM and EFS for my d22 Navara. all about the same money, also i going to stay with stock torsion bar as i have no bullbar on the ute. does that sound like a good choice? so of the 3 kits which is the one i should get. i'm leaning towards EFS as it has the best warranty of the 3. thanks. i've done a search but can't find the right info.

Post by **oondy** » Tue Feb 17, 2009 2:46 pm

Dobinson gear is pretty good, even with the uprated torsion bars they still ride nice, my mates has one with an ally bar and its smooth as to ride in.

PM sent re prices

cheers

OONDY

Post by **Suspension Stuff** » Tue Feb 17, 2009 2:53 pm

In my opinion the best setup is Lovells shocks for $440, adjust the Torsion bars and put an air assist kit in the rear $520 so you can give yourself a bigger then 2" lift when you want and also a more comfortable ride and the instructions come with the bags so you can fit them yourself.

Give yourself a wheel alignment and your done.

We normally fit the whole kit including wheel alignment for $1250.

Shane

Post by **woznme** » Tue Feb 17, 2009 8:18 pm

appreciate the quotes, i'm not really into whats the best in suspendsion so i'm hoping someone else will tell me how Dobinson or Lovells gear is. i don't really want more then 2 inch so the air assist thingo isn't something i'd go for. can you 2 blokes send pm me a price for the (supply only) of the kit (as i reckon i can put it in) including and excluding torsion bar. thanks again and if anyone else with better knowledge then me help me make the right choice.

Post by **woznme** » Tue Feb 17, 2009 8:22 pm

sorry so this is what i need

rear spring (heavy duty, its my work car and often carry heavy loads)
4 shocks
ubolts and bushes

probally not a torsion bar but worth giving me a price including as well.

Post by **Suspension Stuff** » Wed Feb 18, 2009 2:29 pm

https://www.suspensionstuff.com.au/shop ... ath=137_34

Lovells Shocks $440
Heavy Duty Dobinsons Leafs, U bolts, shackles, pins and rubber or poly bush kit. $600. We do highly recommend rubber bushes kits though for comfort and flex.
MaxiTrac Torsion Bars $350

All prices include freight.

For load carrying capacity and comfort the load assist kit is the better option.

Shane

Post by **woznme** » Thu Feb 19, 2009 10:57 pm

thanks for the advice...went with Dobinson all round. I'm sure i'll be pleased with the result. oondy provided fast service. thanks

Post by **Suspension Stuff** » Fri Feb 20, 2009 10:57 am

How about that. While I'm busy sending stuff to Adelaide, Oondy is busy sending stuff up to Qld. Small world these days.

Shane

Post by **woznme** » Fri Feb 20, 2009 11:25 am

4WD Stuff wrote:How about that. While I'm busy sending stuff to Adelaide, Oondy is busy sending stuff up to Qld. Small world these days.

Shane

sorry about that, i had already done deal tuesday night before your quote was posted. thanks for your time though.

Post by **Suspension Stuff** » Fri Feb 20, 2009 11:40 am

woznme wrote:
4WD Stuff wrote:How about that. While I'm busy sending stuff to Adelaide, Oondy is busy sending stuff up to Qld. Small world these days.

Shane
sorry about that, i had already done deal tuesday night before your quote was posted. thanks for your time though.

That's fine Oondy is a good dude. He sold a set of coils to a guy who was local to me and they had sagged. Slightly wrong coil for application. Anyway Oondy sent new coils out no probs, so if you did have any problems he would fix it.

Shane

Post by **woznme** » Fri Feb 20, 2009 11:59 am

that sounds like service...i'm glad i didn't just go with the 3 i listed from the regular shop, never know what service you get from them after the money is counted.

Outer Limits 4x4 Board

lift kit

lift kit

thanks guys

Who is online