Hello I am new in this forum. I from Canary Island (Spain) and I dont know speak english very well.
I have a 1991 Land Rover Discovery 200tdi and I had a preparation with 3-link from Safarigard, 36" Super Swuamper..... but 3 year ago I decided a big modification.
My Discovery have a
- LS1 chevrolet corvette engine
- NV4500 gearbox
- Atlas 2 (3:8)
- Klune V (2:7)
- Unimog 406 axles with disc conversion.
- Discotowsky-Sabinita suspension
- 44" Super Swamper bogger rear and tsl front.
I think this year I finish the disco.
Sorry I dont know to put a photos. Any person can say me how?
[img=http://img214.imagevenue.com/loc230/th_70078_DSCF0025_122_230lo.JPG][img=http://img217.imagevenue.com/loc435/th_70080_DSCF0026_122_435lo.JPG][img=http://img211.imagevenue.com/loc12/th_70082_DSCF0027_122_12lo.JPG][img=http://img246.imagevenue.com/loc392/th_70083_DSCF0032_122_392lo.JPG]
[img=http://img136.imagevenue.com/loc791/th_70084_DSCF0033_122_791lo.JPG][img=http://img170.imagevenue.com/loc1166/th_70085_DSCF0040_122_1166lo.JPG]
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
My Discotowsky
Moderator: Micka
John, if building a new rear link set up for a defender , new lowers (trailing arms) and new "A" frame, using a rover ball joint.Bush65 wrote:You may find the angle of the upper links is too shallow for the side loads - this is a difficulty with the narrow spacing between rover chassis rails. I would also be worried about the strength of the stock mounting plates at the chassis end of discos.
Otherwise it is impressive - good luck.
what is the minimun angle you would make the "A" arms at, considering the lowers (trailing arms) will be parralell to the chassis rails
Serg
Saturday morning the disco see the sun.
http://www.youtube.com/watch?v=5m608NQqfgA
http://www.youtube.com/watch?v=eaypW0xz ... re=channel
http://www.youtube.com/watch?v=5m608NQqfgA
http://www.youtube.com/watch?v=eaypW0xz ... re=channel
i
Yes very nice, maybe a little on the tall side though.
Anychance you might be able to post it in the Post up your Rover section, or better still in the Members section to show all of what you have done and continually update it?
I know that hundreds of people will read it
Your english is better than a LOT of other people on this site, even though english is thier first language
Anychance you might be able to post it in the Post up your Rover section, or better still in the Members section to show all of what you have done and continually update it?
I know that hundreds of people will read it
Your english is better than a LOT of other people on this site, even though english is thier first language
f
Don't know how to do the quote thing yet.
DiscoDino wrote "Looks great!"
Yes it sure does , i just had a look at whats written at the bottom of your post and it mentioned your Discovery. Can you please do a similar thread would love to see and hear about yours? If a thread already exists please let me know where?
DiscoDino wrote "Looks great!"
Yes it sure does
, i just had a look at whats written at the bottom of your post and it mentioned your Discovery. Can you please do a similar thread would love to see and hear about yours? If a thread already exists please let me know where?heyluv4bee'n - no build thread per se, it's been 10 years in the making (actually today is the 10 year anniversary of buying that Disco).
You can see a lot of pictures on my facebook (Nadim Samara) or on YouTube (search DiscoDino).
Cheers,
Nadim
You can see a lot of pictures on my facebook (Nadim Samara) or on YouTube (search DiscoDino).
Cheers,
Nadim
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Thanks man!
Suspension is off the shelf OME (
), diffs are Toyota 8" Ring and Pinion with 30 spline Jac Mac axles and Longfield Chromo CVs...
Next step is to maintain the engine, ZF, LT, Ashcroft, wrap it around a tube chassis, put a pair of steering Rockwell 2.5t axles, same tires, and coil overs...aiming to drop 500kg by doing that and lowering the center of gravity and gaining stability...
The current items (suspension, axles, wheels, brakes, etc...) will go on my 1998 daily driver and have 35-37 tires for road/camping use...
Good luck with yours...post more pictures/videos ASAP!
Suspension is off the shelf OME (
), diffs are Toyota 8" Ring and Pinion with 30 spline Jac Mac axles and Longfield Chromo CVs...Next step is to maintain the engine, ZF, LT, Ashcroft, wrap it around a tube chassis, put a pair of steering Rockwell 2.5t axles, same tires, and coil overs...aiming to drop 500kg by doing that and lowering the center of gravity and gaining stability...
The current items (suspension, axles, wheels, brakes, etc...) will go on my 1998 daily driver and have 35-37 tires for road/camping use...
Good luck with yours...post more pictures/videos ASAP!
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Who is online
Users browsing this forum: No registered users and 18 guests