Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux/Bundy Diff Width
Moderators: toaddog, Elmo, DUDELUX
Hilux/Bundy Diff Width
Does anyone know the difference in the width between the Hilux, Bundera & 4-runner/Surf Diffs???
Im thinking of a Solid Front conversion & need to know the best diff to put at the front.
D
Im thinking of a Solid Front conversion & need to know the best diff to put at the front.
D
Depends on whether your going coils or not!
The bundera are set up for coils and the hilux and 4runners are set up for leaf springs.
I am pretty certain most if not all hilux/4runner front diffs are the same width as each other, but then and again i also thought the wide tracks rears were all the same and in the other post i found out there are two slightly different.
The bundera are set up for coils and the hilux and 4runners are set up for leaf springs.
I am pretty certain most if not all hilux/4runner front diffs are the same width as each other, but then and again i also thought the wide tracks rears were all the same and in the other post i found out there are two slightly different.
i have a complete Bundera front end for sale including arms....and any other bits u may need
daniels_crazy@hotmail.com
daniels_crazy@hotmail.com
not shaw on the actual width there but idid one of these conversions about 5 years ago when i worked for boab 4x4 the chasis is the same width but is bent slightly differnt we built in 5" of lift by lowering the rear radius rod mounts with fabed brakets we got a complete halfe cut chasis and cut all mt for springs and shocks and welded them onto the bare surf chasis it is fully blue plated and engenered(spelling)and flex quit well for a strugle-lux it is now up for sale as he wants a land crusier 100
Who is online
Users browsing this forum: No registered users and 12 guests