Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux/Bundy Diff Width

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
ddr
Posts: 589
Joined: Thu Jan 09, 2003 7:44 am
Location: Not where I wanna be

Hilux/Bundy Diff Width

Post by ddr »

Does anyone know the difference in the width between the Hilux, Bundera & 4-runner/Surf Diffs???

Im thinking of a Solid Front conversion & need to know the best diff to put at the front.
:D
D
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

Depends on whether your going coils or not!

The bundera are set up for coils and the hilux and 4runners are set up for leaf springs.

I am pretty certain most if not all hilux/4runner front diffs are the same width as each other, but then and again i also thought the wide tracks rears were all the same and in the other post i found out there are two slightly different.
User avatar
ddr
Posts: 589
Joined: Thu Jan 09, 2003 7:44 am
Location: Not where I wanna be

Post by ddr »

I was gonna go coils.
I dont really want to add spacers or anything so having the front & rear diffs is a must

D
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

Pritty sure bundera front diff is same width as lux prefict for coil conversion
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

bundera = gay

radius arms = gay

may as well go leafs, easier, flex = same or better

get a hilux, as the bundy axles are not the same length and hard to get hold of, but hilux = everywhere
hands and mums dont count!!!
Posts: 183
Joined: Sun Nov 10, 2002 7:05 pm
Location: Melbourne

Post by Bundytime »

i have a complete Bundera front end for sale including arms....and any other bits u may need

daniels_crazy@hotmail.com
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

does anyone have and actual width in inches or mm for a hilux diff
www.overkill4x4.com
ph 94766137
Posts: 65
Joined: Tue Jan 14, 2003 9:37 pm
Location: Brisbane

Post by bazuky »

not shaw on the actual width there but idid one of these conversions about 5 years ago when i worked for boab 4x4 the chasis is the same width but is bent slightly differnt we built in 5" of lift by lowering the rear radius rod mounts with fabed brakets we got a complete halfe cut chasis and cut all mt for springs and shocks and welded them onto the bare surf chasis it is fully blue plated and engenered(spelling)and flex quit well for a strugle-lux it is now up for sale as he wants a land crusier 100
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

58" WMS to WMS

1450mm
hands and mums dont count!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests