Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I'm looking to buy a canopy for my standard 03 (old shape) Hilux. The Luxs have the rear bar system behind the back window that is welded into the rear tray.
If i fit a canopy do i have to cut this bar system off to make the canopy sit flush with the cabin or do the canopies somehow fit over the top of the bar work??
The canopy i'm looking at is off an 02 SR5 Hilux so the tray is the same dimensions, its just the bar work that worries me.
When I had the canopy on my Rodeo I had to remove the bar but it is bolted on Rodeos so no drama to remove it.
I found though that the Flexiglass range had an option to keep the bar as the front wall of the canopy is riveted in so you could have it positioned to suit.
My canopy was an ARB plastic canopy though so you have to remove the bar to fit these ones.
I'd say you will have to remove yours too as I didn't think SR5 Hiluxs had the bar to begin with.
it depends how it was ordered there are the ones that conceal the head board and the ones you have to cut off best way to tell is to sit it on and see if it sits on the tub properly.
