Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dump pipes: MTQ vs Beaudesert
Dump pipes: MTQ vs Beaudesert
Hey all,
Was just wondering ppls opinons on the different dump pipes out there. Im looking at gettin one and am not sure would be better, if there is a better option. From what i understand the MTQ one is cast so its more resistant to cracking. The beauy one is made by them and ive herd heaps of ppl rave bout them, havent herd too much bout the MTQ one tho.
Also found a Redback/ProEX dump pipe through the local exhaust shop. Could this be a cheaper alternative or would i be better making my own then buying that particular pipe.
Vehicle is 02 td42t.
Cheers
Aaron
Was just wondering ppls opinons on the different dump pipes out there. Im looking at gettin one and am not sure would be better, if there is a better option. From what i understand the MTQ one is cast so its more resistant to cracking. The beauy one is made by them and ive herd heaps of ppl rave bout them, havent herd too much bout the MTQ one tho.
Also found a Redback/ProEX dump pipe through the local exhaust shop. Could this be a cheaper alternative or would i be better making my own then buying that particular pipe.
Vehicle is 02 td42t.
Cheers
Aaron
The MTQ ones measure 2 1/4 inch internal, and when we do patrol power upgrades we are consitantly 10-15kw more for what we do at the wheels that the other local shops who use bolt on [we all use the same dyno] than tiapan, BD or MTQ systems.
We have our own plates laser cut, and make our own dump pipe from 3" mandrel bend with a blended wastegate section.
Can be jet hot coated at extra cost inside and out, so it lasts for ever.
We also use a different muffler to most.
We have our own plates laser cut, and make our own dump pipe from 3" mandrel bend with a blended wastegate section.
Can be jet hot coated at extra cost inside and out, so it lasts for ever.
We also use a different muffler to most.
pm sentAssassin_Offroad wrote:The MTQ ones measure 2 1/4 inch internal, and when we do patrol power upgrades we are consitantly 10-15kw more for what we do at the wheels that the other local shops who use bolt on [we all use the same dyno] than tiapan, BD or MTQ systems.
We have our own plates laser cut, and make our own dump pipe from 3" mandrel bend with a blended wastegate section.
Can be jet hot coated at extra cost inside and out, so it lasts for ever.
We also use a different muffler to most.
pm sentAssassin_Offroad wrote:The MTQ ones measure 2 1/4 inch internal, and when we do patrol power upgrades we are consitantly 10-15kw more for what we do at the wheels that the other local shops who use bolt on [we all use the same dyno] than tiapan, BD or MTQ systems.
We have our own plates laser cut, and make our own dump pipe from 3" mandrel bend with a blended wastegate section.
Can be jet hot coated at extra cost inside and out, so it lasts for ever.
We also use a different muffler to most.
99 GU Patrol Wagon 4.2td
Denco Diesel in Wagga?? they do highmount kits using the schwitzersazzad wrote:Thanks for the pm assasin
Does anyone know where I can get, off the shelf, a 3" dump to suit a hi mount schwitzer s2a?
Yes I could make one but if I can get one of the shelf i will do that so the rig isnt off the road.
Dazza
............and 2 years for the rest of the ute.Z()LTAN wrote:i made my dump pipe in 2 hours...
Go and brag elsewhere, like the Toymotor section perhaps, I along with others really tire of your useless, non contributing posts. FFS it took three posts and two pictures to tell us to try a turbo distributor for the flange to make your own dump pipe
82 Rangie with lots of bits for comps
98 GU patrol with lots of bits for touring
98 GU patrol with lots of bits for touring
Oh yeah?Merv wrote:
............and 2 years for the rest of the ute.
Go and brag elsewhere, like the Toymotor section perhaps, I along with others really tire of your useless, non contributing posts. FFS it took three posts and two pictures to tell us to try a turbo distributor for the flange to make your own dump pipe
I wouldn't have expected a reply like that from anyone... especially you..
Run along and play with your rangie that never works
Im just trying to show people that you can build things yourself even though you've never done it b4...
Maby you guys should try a little harder in the comps this year... You might even be able to finish one aye?.
Oh and what have you added to this thread?
Nothing...
So shutup
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Who is online
Users browsing this forum: No registered users and 35 guests