Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

td4.2 3'' straight thru exhaust ?????

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

td4.2 3'' straight thru exhaust ?????

Post by jaybammm »

hi there just bort a 93 gq has a td4.2 the turbo aftermarket just wondering whats the best muffler system to put on it

i.e 3'' or 3 1/2'' straight thru exhaust with a dump pipe of the turbo no cat no muffler whats the best to run ....??????

cheers
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Re: td4.2 3'' straight thru exhaust ?????

Post by money_killer »

jaybammm wrote:hi there just bort a 93 gq has a td4.2 the turbo aftermarket just wondering whats the best muffler system to put on it

i.e 3'' or 3 1/2'' straight thru exhaust with a dump pipe of the turbo no cat no muffler whats the best to run ....??????

cheers
3" from dump pipe straight thru no mufflers. that is the go gives it a nice sound :cool:
Top
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

Post by jaybammm »

sweet thats what im after how much would i pay for this system.. and would the motor gan more power cheers
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

Go for a bigger 3" dump, followed by a 3" mandrel bent exhaust - no mufflers.

Will cost from $900 up to $1800, supplied not fitted. I run an MTQ and find it is built well, is modular (not two piece) which allows for more flexibilty for mods, and it was shit easy to put in ie. all of the mounts lined up and it fitted up more snug than the factory unit.
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

anywhere around 1200 fitted for a 3" mandrel bent system, its the first step in getting decent power from your TD42

Another 400 :shock: odd for a 3" dump pipe...
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

my 3" cost me 250 for the cast dump and 200 for the straight exhaust. all mandrel, with a stainless flex joint and a flange behind the cab. (mild steel)
Top
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

i would shop around i would not pay anything more then 1000 max for 3" straight thru from dump pip back. not mandrel bent but.

i guy on patrol forum was selling a denco 3" dump pipe for 150 im pretty sure
Top
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

I paid $800 fitted for 3" mandrel bent system with 3" dump pipe, flex joint and pyro bung, for my TD42 GU.
It's not pretty but sounds great and well priced :cool:

A different place quoted me $1500+ for the same thing with out blinking an eye!

Shop around!
2001 GU Patrol DX wagon, TD42, Air Lockers, twin spare carrier, Barrett HF, 35" Treps, high pinion rear, Staun beadlocks, 60l Engel and more!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sidewayz wrote:my 3" cost me 250 for the cast dump and 200 for the straight exhaust. all mandrel, with a stainless flex joint and a flange behind the cab. (mild steel)
You should buy 1000 of them and sell them for what everyone else pays for them, and retire. Neat $700 profit on each one...
Top
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

Post by jaybammm »

could you use a dump pipe of a skyline or any other car from turbo????
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

jaybammm wrote:could you use a dump pipe of a skyline or any other car from turbo????
You can probably get the right flange for the turbo, but getting the right exit angle is tricky. I'm pretty sure i have to make a dump for mine, however dumbdunce has had success with the same turbo i'm using paired up with the factory dump (the combination is off another vehicle).

At the end of the day, unless you have the equipment to fab one, it's a lot quicker and easier to just buy a bolt on system thats already been tested/proven.
Top
tjh
Posts: 3
Joined: Sun Dec 21, 2008 2:09 pm
Location: sunshine coast

Post by tjh »

hey mate, jump onto EBAY.... full 3 inch exhaust including turbo dump for around the 500 mark.BRAND NEW. cant go wrong.... cheers

todd

fairly certain these are mandrell aswell..BUT.. i could be mistaken on that part.. cheers
Top
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

bogged, dump pipe was from beudessert exhausts and the rest was made local. but i know the guy so it was basically cost. :armsup:

but seriously, i think anything over about 7-800 for a full mild steel mandrel exhaust without mufflers is a total rip off.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sidewayz wrote:bogged, dump pipe was from beudessert exhausts and the rest was made local. but i know the guy so it was basically cost. :armsup:.
that doesnt matter, your retirement fund awaits :D
Top
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

Post by jaybammm »

ok sweet thanks for the replys cheers
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

jaybammm wrote:could you use a dump pipe of a skyline or any other car from turbo????
Depends on your turbo placement.

I can fit one on mine, though the turbo is after market and it will sit a bit closer to the firewall than I would like (40-50mm)
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

Post by jaybammm »

its a aftermaket turbo glide set up high mount ....
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

sidewayz wrote:bogged, dump pipe was from beudessert exhausts and the rest was made local. but i know the guy so it was basically cost. :armsup:

but seriously, i think anything over about 7-800 for a full mild steel mandrel exhaust without mufflers is a total rip off.
anything over 300 or 400 for ANY system with no mufflers is complete rip off.
http://www.mothfukle-engineering.com/
Top
Posts: 3
Joined: Sun Mar 01, 2009 10:09 am
Location: Hobart, Tasmania

Post by Tassie patrol »

just a wee off topic I paid $900 full mandrel with muffler , extractors ,flexi join all new and mild steel for $1800 :shock: Id expect it to be nice shiny s/s and near be able to have a shave in the refection
Top
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

Post by jaybammm »

i got the 3'' system done today i had a 2 1/2 dump pipe of the turbo so for now i just got 3'' welded on just under the turbo wiht a mendel bend then stright no muffler with flange and dumps infront of rear diff $380 at muffler shop on moss street across from auto-barn.. sounds tuff goes harder latter get the 3inch dump....
Top
Posts: 295
Joined: Sun Sep 24, 2006 5:34 pm

Post by azzad »

jaybammm wrote:i got the 3'' system done today i had a 2 1/2 dump pipe of the turbo so for now i just got 3'' welded on just under the turbo wiht a mendel bend then stright no muffler with flange and dumps infront of rear diff $380 at muffler shop on moss street across from auto-barn.. sounds tuff goes harder latter get the 3inch dump....
Is this on a ute?

I thought it was illegal to have an exhaust finish under a vehicle?

By finishing just before the diff your pipe will be about 1/3 shorter than normal and you havent got the hard bit with all the bends; hence the cheap price.

Dazza
Top
Posts: 71
Joined: Thu Jul 10, 2008 8:24 am
Location: brizzy

Post by jaybammm »

ya your right cops gunna love it ... tho im doing a lift this week end and gunna later finish it off mabe ...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest