Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series t/fer case

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 7
Joined: Mon Oct 06, 2008 8:40 pm
Location: oakey Qld

60 series t/fer case

Post by rigger329 »

HI

Will the transfer case from a 1983 60 series, mount into the same standard position in a 1977 hj45 or will i have to reposition the mounts

thanks ed
HJ45 work in progress
Top
Posts: 156
Joined: Tue Sep 27, 2005 7:23 pm
Location: Dandenong ranges

Post by Dyna Beast »

If you are talking about the transfer case only there is no mounts.There is also no tail shaft hand brake drum on the transfer case.If you are talking about the gearbox and transfer case together.Then there is issues.Ohh man are there issues.Unless the bell housing of the H gearbox matches the gear box of the 2h gearbox out of the 60 series.
Cheers
Hybrid rover ute. Isuzu diesel. Custom suspension. Winch. Snorkel etc. etc.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Dyna Beast wrote:If you are talking about the transfer case only there is no mounts.There is also no tail shaft hand brake drum on the transfer case.If you are talking about the gearbox and transfer case together.Then there is issues.Ohh man are there issues.Unless the bell housing of the H gearbox matches the gear box of the 2h gearbox out of the 60 series.
Cheers
his would be a 2H

only the early 4x series had the H
03 HDJ100R GXL / 94 FJ45-80
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 9 guests