Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Winches - Cable vs Rope

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 54
Joined: Sun Jun 10, 2007 9:57 pm

Winches - Cable vs Rope

Post by wellsey »

I did a seach and couldnt find anything on this, so please forgive me if this is an old topic.

What do you guys think? The vehicle in question is my 96 hardtop sierra and the winch is a 9500 pound ironman or warn.

I love the idea of the light weight and low stored energy properties of the rope, however I wonder at its abrasion resistance?

How does it go being used over rock ledges/steps, or thru mud/dirt? What sort of life could I expect to get out of it, considering its higher initial costs to buy?

What do you guys all think?

Cheers, Wellsey.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

most ropes dont like the heat and are not much good in the elements for long times, they are the go for comps when they are going to break from use anyway its far lighter, way safer but much much more expensive.
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Rope doesn't like rocks much.
I don't like rope, but thats just me.
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Rope is fantastic.

Has jack all abrasive resistance, but if it is for a weekender if you are winching you have time to make sure it doesn;t unnecessarily touch the ground. Carry spare winch dampeners to place under it for when it is touching the ground, keep it clean and make sue you get a protective sheath.
Also make sure it doesn't knot - don't ask but I learnt the hard way.

When it is muddy, after the trip make sure you wash it and then dry it completely.
It only takes 5 minutes to remove the rope from the drum to clean it.

If you take care of the rope it will last.

Dave.
Land Rover Discovery - GQ conversion underway
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

i like rope, i will not use cable as my old man is very experiences with wire and the result of it breaking (not injuring himself) i trust wire more but know that well maintained rope will hold more. aslong as rope is kept in good condition when not in use. then it is awsome, but still alot more expensive and higher maintenance.

but i like rope so.....
turbos are nice but i'd rather be blown
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

My rope came with a 5m sheath/rope protector....its nice and thick and should do the job...I'm thinking of getting some old fire hose, chopping it, sewing some velcro onto the chopped edges then I can place it on the rope anywhere I need it if there is more than one spot where it may rub....Just an idea. The rope for the zook is great. I took off my wire about 2 weeks ago and have really noticed the difference in the front end "heaviness" :cool:
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 54
Joined: Sun Jun 10, 2007 9:57 pm

Post by wellsey »

I am an Arborist (tree surgeon), and in my work I use this stuff a fair bit. It is a hollow tube tape made from polyester or dyneema webbing, with a breaking strain of 4000 pounds. We use it to make slings for all sorts of applications.

I can see this stuff being threaded over the length of a winch rope to add strength and abrasion resistance.

Whatya reckon?

Image
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

wellsey wrote:I am an Arborist (tree surgeon), and in my work I use this stuff a fair bit. It is a hollow tube tape made from polyester or dyneema webbing, with a breaking strain of 4000 pounds. We use it to make slings for all sorts of applications.

I can see this stuff being threaded over the length of a winch rope to add strength and abrasion resistance.

Whatya reckon?

Image
Top idea champ..... Being a climber i know how strong tube tape is... :D :D

will have to check if it will fit over 12mm though :?:

cheers smitty
innovation is better, better is faster, and fast is all that counts
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

i rekon thats the go hammey, i use that stuff over abseil rope when the top of the face is rubbing in rocks, its great stuff. take a fair effort to cut it with ya average pocket knife to!
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 54
Joined: Sun Jun 10, 2007 9:57 pm

Post by wellsey »

Climber tree climber or climber rock climber?

The tube tape should fit over 12mm, I have it threaded over my flipline under the same prinicple, and the flipline is 11mm 24 braid.

The other question I forgot to ask is whats the winch line worth per metre?

Cheers all, Wellsey.
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

wellsey wrote:The other question I forgot to ask is whats the winch line worth per metre?

Cheers all, Wellsey.
Allow for atleast $13/m.
If you dont mind buying from overseas, try - www.rockstomper.com I havent brought from them but others have. Not sure where my rope will come to when I get to that stage.
THOUGHT FOR THE DAY....
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

wellsey wrote:Climber tree climber or climber rock climber?

The tube tape should fit over 12mm, I have it threaded over my flipline under the same prinicple, and the flipline is 11mm 24 braid.

The other question I forgot to ask is whats the winch line worth per metre?

Cheers all, Wellsey.
Rock climber.... traditional... getting fatter and weaker by the day :D :D

Sorry mate, should of explained my self better.
whinch rope dosnt behave like climbing rope(dynamic or static) its more like ski rope for want of a better term.
12mm is just a measurement, it gets a lot fatter.
you'll see.....

cheers smitty
innovation is better, better is faster, and fast is all that counts
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

http://www.roadlessgear.com/page/RGL/PROD/R/GOROPE5-16

winch rope bloody cheap. US$1.50 a foot. Ask for long rope protector, stainless steel thimble eye.

I got 150 ft and it worked out to about AUS$300.00 with a pretty Machined Alloy Winchline.com Hawse Fairlead. It helped having Mud_Muncher over in the US to pick it up and bring it home for me but you could probably get all that shipped to AUS for around AUS$400.

Works out about 1/2 price of buying it here....
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

hammey wrote: Rock climber.... traditional... getting fatter and weaker by the day :D :D
LOL that's me 2 :oops:
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

dank wrote:http://www.roadlessgear.com/page/RGL/PROD/R/GOROPE5-16

winch rope bloody cheap. US$1.50 a foot. Ask for long rope protector, stainless steel thimble eye.

I got 150 ft and it worked out to about AUS$300.00 with a pretty Machined Alloy Winchline.com Hawse Fairlead. It helped having Mud_Muncher over in the US to pick it up and bring it home for me but you could probably get all that shipped to AUS for around AUS$400.

Works out about 1/2 price of buying it here....
Ill second that. Figmo at Roadless gear is very good to deal with.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Post by 98lux »

Grave dig, Search works :armsup: :armsup:

So for a winch that may never get any use, would wire or rope be better?

Gonig by some there is more maintance in rope and for the extra weight savings would it be worth it.

we do mostly touring solo that is why the winch is needed.

Your thouhgts please.
if ya gona rev it, Chev it
Posts: 33
Joined: Fri May 11, 2007 8:44 pm
Location: Sydney

Post by bundyrulz »

G'day Wellsey,
please excuse me for jumping in on this post. I recently spent some months in the US. I bought some amsteel rope back for my winch. I just happened to bring a few extra back for friends. Not all took them up. I also have the alloy hawse. So if your interested PM me.

Bundyrulz
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

What length spares do you have :?:
What thickness are they :?:
Kind Regards,
Brad
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Post by BUSTED100 »

LuxyBoy wrote:What length spares do you have :?:
What thickness are they :?:
x2
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Posts: 396
Joined: Wed Dec 17, 2003 3:34 pm
Location: South Side Brisbane

Post by Draven »

x3
I do Web Hosting!
Http://www.ingenuity.net.au

Check out my 4x4 blog!
http://www.monster4x4.com.au/
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

x4
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

He has


I have 5/16" x 100' blue synthetic amsteel rope. Has a gal eyelet. $350
Heavy duty Hawse Fairlead and mount bolts. $60

I have two ropes but only one Hawse.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

anyone dealt with
http://www.ropewa.com.au/joomla/index.p ... etail&id=3

50m 12mm Dyneema Double Braid Winch Rope
This is a 50m long 12mm dyneema double braid rope, complete with a 150mm splice at each end for use on 4x4 recovery winches. This rope is ideal for use in Winch Challenge competitions due to its light weight and softness on the hands.

The rope comes with splices at both ends.

For shipping in Australia, please select the 4kg+ post box in the shipping section.

Price:- $$450 (AU)
Posts: 15
Joined: Wed Jan 21, 2009 7:25 am
Location: Coasty

Post by andrewlux »

With the webbing the tube only comes in 1" tube and from memory will struggly for 12mm rope (depending if there is a case on the rope or not) , but you could always get a 2" webbing and sew it in half and will very easily alow for a 12mm rope.

If you get a webbing called spectra which is a lot more expensive but is even better than the polyester webbing, it does not get effected by heat of sun and better for abrasive surfaces as well.
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

bogged wrote:anyone dealt with
http://www.ropewa.com.au/joomla/index.p ... etail&id=3

50m 12mm Dyneema Double Braid Winch Rope
This is a 50m long 12mm dyneema double braid rope, complete with a 150mm splice at each end for use on 4x4 recovery winches. This rope is ideal for use in Winch Challenge competitions due to its light weight and softness on the hands.

The rope comes with splices at both ends.

For shipping in Australia, please select the 4kg+ post box in the shipping section.

Price:- $$450 (AU)
Wonder why their 10mm is more expensive :?
Only difference I can see is it floats..........maybe useful for fishing whales with; just harpoon and winch in :lol:
Kind Regards,
Brad
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Post by LuxyBoy »

andrewlux wrote:With the webbing the tube only comes in 1" tube and from memory will struggly for 12mm rope (depending if there is a case on the rope or not) , but you could always get a 2" webbing and sew it in half and will very easily alow for a 12mm rope.

If you get a webbing called spectra which is a lot more expensive but is even better than the polyester webbing, it does not get effected by heat of sun and better for abrasive surfaces as well.
Why not just buy the Dynex Cover version (comes with a cover)

http://hampidjan.is/media/pdf/06_Dynexy ... 00head.pdf
Kind Regards,
Brad
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

LuxyBoy wrote:
andrewlux wrote:With the webbing the tube only comes in 1" tube and from memory will struggly for 12mm rope (depending if there is a case on the rope or not) , but you could always get a 2" webbing and sew it in half and will very easily alow for a 12mm rope.

If you get a webbing called spectra which is a lot more expensive but is even better than the polyester webbing, it does not get effected by heat of sun and better for abrasive surfaces as well.
Why not just buy the Dynex Cover version (comes with a cover)

http://hampidjan.is/media/pdf/06_Dynexy ... 00head.pdf
cause its in Iceland... LOL
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

If you were that worried about weight you shouldn't have put a 9500 pound whinch on the front of a sierra. Use cable for non competition duties IMO
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

GRPABT1 wrote:If you were that worried about weight you shouldn't have put a 9500 pound whinch on the front of a sierra. Use cable for non competition duties IMO
I have seen more than one HImount stall out on a sierra.

Bruce that price dosent seem to bad. Wanna go halfs in frieght.
THOUGHT FOR THE DAY....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

turps wrote:Bruce that price dosent seem to bad. Wanna go halfs in frieght.
wonderin on the quality.. wish I went with the USA $ at the time..
winchline, and someother joint still have cheap prices in USA, wondering if they are stil worth lookin at.. if not, yea 1/2s sounds ok.. wont be for a few weeks.. got tax bill this week. :( or I'd buy the stuff this bloke above is sellin
Post Reply

Who is online

Users browsing this forum: No registered users and 148 guests