Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

can i cut a leaf spring???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 47
Joined: Fri Oct 13, 2006 9:25 pm
Location: willetton perth

can i cut a leaf spring???

Post by 83jack »

just wondering guys if i can cut the eyes of a mian leaf spring to add it to my pack cause i did ruf and lost the military wrap so now im down to a 3 leaf pack and have lost some hieght so want to add another leaf back in...
or, can i redrill a new hole in the military wrap so i can fit that back in. cheers guys.

need a quick reply on this if i could guys cheers.
cheers
simon
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

drilling spring steel can be done but it's not reccomended for what you wanna do. You can cut the eyes off though but best to do it in a guillotine though as heat can make the spring steel brittle. Alternatively use 1mm cutting discs on a grinder and keep water running over the cut and cut and It will be fine.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 47
Joined: Fri Oct 13, 2006 9:25 pm
Location: willetton perth

Post by 83jack »

sweet as, thanks mate!!!!
cheers
simon
Top
Posts: 91
Joined: Tue May 27, 2008 11:05 pm
Location: Perth

Post by Adsport »

yeah try a megaline disc
'89 WT Sierra.......... 4AC + lawnmower radiator !
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

1mm disc is what i have used with no water


didnt have a prob
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 47
Joined: Fri Oct 13, 2006 9:25 pm
Location: willetton perth

Post by 83jack »

cheers guys...its all done now :) sits like it used to but with longer springs hehehe :cool:
cheers
simon
Top
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Contact:
Contact brendan_h

Post by brendan_h »

how about a bandsaw guys?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Top
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

brendan_h

Posted: Sun Mar 15, 2009 5:09 pm
how about a bandsaw guys?
it would be able to cut it no problems, but it would be safer to have the leaf in a vice and trim it with the grinder.
4age zook ute in lots of bits
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

GRPABT1 wrote:drilling spring steel can be done but it's not reccomended for what you wanna do. You can cut the eyes off though but best to do it in a guillotine though as heat can make the spring steel brittle. Alternatively use 1mm cutting discs on a grinder and keep water running over the cut and cut and It will be fine.
Where he is cutting it will not be an issue.
Water to cool a cut with an angle grinder could easily be an issue that may well be life threating and not something I would recommend unless your tools are specifically designed for this type of use.

In general I try to keep water and mains powered tools as well seperated as I can.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Yeah I thought of that, in my head I was thinking minimal water, I never used water when I cut mine with 1mm disk but I was using the spring in a different application and no load is anywhere near the cut.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest