Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

THE "silly" question thread

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Zook_Fan wrote:5.12 vitara front diff gears into sierra diff centres:
Whats the best way to do it?
Do you use just the R&P or whole centre?
What year vits came with these gears?
SWB or LWB?

Pinions in sierra diffs:
Do ARB have lockers for both 2 and 4 pinion lockers?
What do WT diffs have?
What do NT diffs have?
Will a NT centre fit into a WT?
How much reduction would it be if you put the NT into a WT?
Worth it?
the best way to do it is to get someone that knows what they are doing to do it. the most cost effective way to achieve this is to do it when you are installing a locker or rebuilding the diff to fit after market chromo axles. get a solid spacer installed instead of the crush sleeve for the closest thing to bullet proof you can have.

it's just the ring and pinion. the vitara diff and housing goes in the bin.

any vitara 1.6L is 5.12... once you get into the v6's, then you start hitting the 4.62's i think.

not sure about the arb locker availability

w/t is 3.7... n/t is 3.9... you're reduction would be 3.9/3.7 = 1.05%... is that worth it? dunno - is it worth increasing tyre size 5%? maybe.
DMA Founding Member #1 - Now Retired
Posts: 27
Joined: Tue Aug 19, 2008 9:14 am
Location: Newcastle

Post by dxkrazed »

Ok I figure my question best suits this thread;
Where can I find some nice decal / stickers for my 4wd?
Large tough dog sticker for example. I would love to know where to find one of these.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

dxkrazed wrote:Ok I figure my question best suits this thread;
Where can I find some nice decal / stickers for my 4wd?
Large tough dog sticker for example. I would love to know where to find one of these.
Usually from the manufacturer or distributor. At comps they often hand them out at the trade stands.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

dxkrazed wrote:Large tough dog sticker for example. I would love to know where to find one of these.


Buy their gear and you usually get some.. :cool:
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Posts: 29
Joined: Thu Oct 16, 2008 12:48 am
Location: chch nz

Post by gomulletgo »

I want to know if the non-vented front disc brakes/calipers etc. from a SWB vitara will fit on the LWB vitara that originally came out with vented front disc brakes/calipers etc. ? I had a good search and couldn't find the info i was after, I know I've read something about this before. Could someone please help me out, I need to know in a bit of a hurry as I'm looking at purchasing another suzuki. Also, did all LWB vitara/escudos come out with the vented front disc brakes? Thank you :)

Note: the LWB vehicle is a 1991 and the SWB vehicle will be about the same vintage.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

eh,

you want to put the non vented onto a vented setup?

why?

afaik i beleive they will fit as the vented ones are the same bolt pattern as sierra ones. and the non vented ones are same as sierra rotors and discs maybe.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 427
Joined: Tue Apr 12, 2005 3:02 pm
Location: South of Radelaide

Post by CHOPS1 »

This may very well be a silly question!

Has anyone locked up the choke mechanism on a sierra carb?
i.e by tieing it up with some wire so it doesnt stay on?

Chop
I THINK ICAN, I THINK I CAN!
Posts: 264
Joined: Sun Sep 23, 2007 1:05 pm
Location: SE Melbourne

Post by Pezooki »

Hi Chop.

The carb in my 91wt has the choke disabled. Mine is done using a cable tie. :D

The reason mine is disabled is because the choke mechanism is stuffed on my carb (was like that when I got it). It starts first time every time, but it needs one or two minutes to warm up before driving it, or it will stall. I have set the "idle-up" on my zook to around 1500RPM, so all I do is turn the parkers on, and walk away for 1-2 mins. Its all good! :cool:

Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Posts: 427
Joined: Tue Apr 12, 2005 3:02 pm
Location: South of Radelaide

Post by CHOPS1 »

Thats good to hear, i presume your talking about the choke idle screw that is underneath the rear of the carby?

Chop
I THINK ICAN, I THINK I CAN!
Posts: 264
Joined: Sun Sep 23, 2007 1:05 pm
Location: SE Melbourne

Post by Pezooki »

No, its an electronic idle-up. When things such as your headlights and your heater fan are turned ON, the idle up kicks in and increases the RPM to help the engine cope with the extra load. In a normal situation, when adjusted to normal specs, you may not really notice the "idle-up" at all ('cos it might be maintaining the same RPM - i.e. it might be compensating for the extra load perfectly.)

Have a look at the carb and turn your headlights on and off. You will see an actuator moving that increases the RPM slightly. This has an adjustment screw on it. This is what I adjusted to set it at my desired Idle-Up RPM. (I cant remember exactly where it is as I'm not with the car at the moment.)

I find the idle-up handy when crawling with my 6.5's too. Parkers go on, idle goes up, car climbs anything with no chance of stalling!

Works well for me! :cool:

Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Posts: 427
Joined: Tue Apr 12, 2005 3:02 pm
Location: South of Radelaide

Post by CHOPS1 »

Thanks pez, well i just locked the choke up so it didnt stay on and let it warm up but its still bellowing out black smoke and soot :roll:
I hate carbies.

Chop
I THINK ICAN, I THINK I CAN!
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

CHOPS1 wrote:Thanks pez, well i just locked the choke up so it didnt stay on and let it warm up but its still bellowing out black smoke and soot :roll:
I hate carbies.

Chop
quit messing around with the 1.3 & steal the 1.6 out of polar_bears vitara, i'll grab the diffs & lockers & you can have the motor
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

what is the average life span for a 16 value vitara motor?
[color=green]Vote Earth[/color]
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

i know a 1.6efi vit with 300k on the clock and what seems to be an unopened original motor still going ok.

my question-- what's a swb sierra fibreglass hardtop worth (as a seller)
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

CHOPS1 wrote:Thanks pez, well i just locked the choke up so it didnt stay on and let it warm up but its still bellowing out black smoke and soot :roll:
I hate carbies.

Chop

You also need to back off the choke screw too. Carbies are easy, just gotta know how they work. If you look from the engine side of the carbie with the throttle on full you will see a screw. Back it off slowly till the choke doesnt come on at cold start.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 215
Joined: Sat Jun 21, 2003 12:59 am
Location: Launceston

Post by mtb4x4mad »

I'm wanting to replace the front and rear output shaft seals on the transfer case of my 93 vit. I've looked at the seals and noted what i assume are part numbers. How do I interpret these:

4877
12661
40
54
KOK

All from the rear output seal. Even better, where is the best place to buy such seals?
Banned
Posts: 11
Joined: Sun Mar 15, 2009 11:18 am

Post by Triangle man »

I am about 6"8 tall (205cms). Will any zook have enough leg room for me?
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Triangle man wrote:I am about 6"8 tall (205cms). Will any zook have enough leg room for me?
a sierra should as long as it's not a ute model no seat adjustment.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Banned
Posts: 11
Joined: Sun Mar 15, 2009 11:18 am

Post by Triangle man »

cheers I am fairly new to 4wds and sierras seem to kick arse and are cheap. I will have to go have sit down in one and make sure though.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

You may want to get a steering wheel spacer made up to pull the wheel closer to you. It helps with knee room, otherwise you shouldn't have a problem.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 166
Joined: Mon Dec 27, 2004 10:21 pm
Location: BrisBane Queensland Au

Post by tanshi »

Im 6'4" and have a sierra. I have a smaller steering wheel (i have power steer) which helps with knee space. as does the after market racing seats i have which support my legs in a bent position thus relieving the strain. You should also be able to move the seat back on its mounts with out too much work.
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

take my advice dont get a long wheel base ute if you want comfort, the seats suk and you cant go back very far at all.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

There's a fine line of comfort with utes.

Grimbo is 6'4" and he fitted into a ute fine, once he fitted a fixed back fibreglass seat that got his back up straight and flush against the cab. Any taller though and he would have struggled as his knees would have been all over the steering wheel.

There also seems to be an awkward size above about 5'9" where you've too close to the wheel and your knees are into the wheel etc.

I'm just over 5'6" but have VERY short legs so I'm laughing - I can't see what all the fuss is about :roll:

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

Gwagensteve wrote:There's a fine line of comfort with utes.

Grimbo is 6'4" and he fitted into a ute fine, once he fitted a fixed back fibreglass seat that got his back up straight and flush against the cab. Any taller though and he would have struggled as his knees would have been all over the steering wheel.

There also seems to be an awkward size above about 5'9" where you've too close to the wheel and your knees are into the wheel etc.

I'm just over 5'6" but have VERY short legs so I'm laughing - I can't see what all the fuss is about :roll:

Steve.
I'm 5' 8" and i think its perfect except my arms seem to be too bent
[color=green]Vote Earth[/color]
Banned
Posts: 11
Joined: Sun Mar 15, 2009 11:18 am

Post by Triangle man »

So it can be done but I may need to do some mods to get comfortable. I used to drive my sisters mazda 121 with no troubles and drive a mazda 3 fairly easily but most of my work mates have been telling me not to waste my time with a sierra .
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

Triangle man wrote:cheers I am fairly new to 4wds and sierras seem to kick arse and are cheap. I will have to go have sit down in one and make sure though.
damn!.......stay away from the cab chassis model...........i'm not one of them short people......you WILL be uncomfortable in a cab chassis.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

has anyone got any C.V and axles for sale in brisbane. im after long side but will more than likely take both
PM me if you have one for sale
michael
Posts: 32
Joined: Wed Nov 15, 2006 5:53 pm

flairs & body

Post by whaldo »

ummm does any one know of any cheep sierra ute cabs and ive seen some photos of zuks with jeep flairs they look phat?
www.roverpark.com
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Reverse light stays on

Post by GRPABT1 »

Hey guys I noticed this morning that my reverse light is staying on constantly. It's alway had one blown bulb but this morning the thing was on no matter what gear I was in. I'm gonna take it out for the time being but is there any fuses or such that might cause this?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

it will just be the switch on the gearbox playing up. it's only on when the ignition is on ?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests