Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

screw in manifold sensor

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

screw in manifold sensor

Post by Fpv_83 »

hey does anyone know what the sensor that screws into the manifold above the alternator do?


cheers
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

What engine bud?

if its a sierra or vit its probably the temp sensor but your question is so vague it really could be anything.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Post a pic of it, that way there is not doubt what we are identifying. As Taff said, your post is too vague.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

Post by Fpv_83 »

Image

My engine is a G13B in a suzuki sierra

Thanks guys
Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

Post by Fpv_83 »

Image[/img]
Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

Post by Fpv_83 »

Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

Post by Fpv_83 »

bloody cant upload an image

<a href="http://s252.photobucket.com/albums/hh10 ... ensor2.jpg" target="_blank"><img src="http://i252.photobucket.com/albums/hh10 ... ensor2.jpg" border="0" alt="Photobucket"></a>
Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

Post by Fpv_83 »

There we go

Yeh so whats that sensor do?
(not my car in the photo btw)

The connector has come off mine and i need a new one
can u buy em from repco or somethin?

Cheers
Mark
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

pretty sure its your coolant temp sensor. i had to order one from suzuki.. genuine part only and it was 65 bucks.
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

its a coolant temp sensor

save your $65 and go down to autobarn. an aftermarket gauge comes with a sender that will screw into the same hole, cost you $30 and be way more accurate.
Posts: 29
Joined: Tue Jan 29, 2008 5:33 pm
Location: sydney

Post by Fpv_83 »

thanks guys
will do that
Posts: 60
Joined: Tue Oct 07, 2008 3:11 pm
Location: Oldina, North West Tasmania

Post by Bron5on »

I bought one of the plasma gauges by speco from autobarn to replace mine, mainly as it was one of the few gauges they had in stock that displayed temp in celcius as opposed to farenheit. Easy to fit. About $45 for the gauge and nearly the same for one of those cup shaped mounts to put it in! Works a treat but a little hard to see in full sunlight. I'd suggest a gauge with a needle as opposed to the little led type lights in mine.
Post Reply

Who is online

Users browsing this forum: No registered users and 77 guests