80 front brakelines

[DIRTY ROCK STAR]

Ok, i went for a test run and some photos on saturday and i appear to have torn/over stretched a front flexy brakeline at the brake end of the diff (the 20cm rubber jobs).
Anyone know if any local places do a replacement thats abit longer or stronger?
or do i have to ring my local ENZED bloke and try to get a cashy?
has anyone had this happen before? im not too sure if its due to getting too much steering lock? my truck has a piss poor turning circle so i wouldnt have thought so. but it appears to pull tight when turning full lock.

any help appreciated.

for the record its not the flexy ling from chassis to diff i already have BBM extended ones there.

[+dj_hansen+]

Just take it off and take it to a brake joint place, repco, bursons etc and find something off the shelf that matches and is a bit longer, or make them up using the steel 'bundy' tube.

Failing that, you should be able to get custom braided made up, but your looking at $80+ per line

[RV80]

If the rears are longer you could use a set of them.

[DIRTY ROCK STAR]

cheers guys i will have a measure up this afternoon as soon as i can to see if the rears are longer or not.
that would likely solve my dramas.
i only have until wed arvo until i load my truck onto a flat top for transporting to tufftruck thursday.

[80's_delirious]

if your short on time, and cant find an alternative straight away, just replace with stock std one. sort something else out later. whats the odds on tearing another one??

[Brendan-s]

Pretty good seeing as he's competing this weekend!!

[DIRTY ROCK STAR]

yeah got a couple of days left

[ozy1]

ring Rick at BBm he should be able to sort you out with something

[DIRTY ROCK STAR]

shaun cheers. i already have BBM extended lines.
but standard from the diff housing to the knuckle etc.
i will give uncle ricko a buzz though.