Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gooda
Im just about to replace all my flogged out bushes on my SWB GQ 88 Model and im debating whether to change the springs i think ihave OME 2" but im not sure how sagged they are as i have many accressies on the car. I know fully articulated it rips the original flares of and i only run 31" BF Muddys on 8" sunraysias. Can any one give me some measurements on a similar vechile with similar OME 2" - 3" lift
swbpatrol wrote:do others running 31" tyres and 8" rims rip off the standard flares on full articulation????
Not sure about ripping flares off with his 31's. But I know of a guy with a 6" susp lift and a 3"BL and he could get his 31's to rub on the body full artic.
My 31's on fact 15x7 rims never rubbed on anything, but my 285/75r16's rubbed on there flares and the body alittle. Now have 35's and they rub in lots of places.
hottiemonster wrote:My dad has a TI and has factotry 16x8" rims
then they wouldnt be 31s would they, they would be metric....
even still an 8 would be to wide I would have thought, except for a wierd swamper size (was a wide 31).
As I have a set of 265/70R16's on 16x7 rims for the road at the moment and there pretty narrow.
i tihnk they might be ripping the flares because they are on Offset 8" Toyate rims and on full flex they stick out more than a normal 8" or 7". Might have to get new rims to stop the problem :-(