Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Reckon this can be done?
Moderator: -Scott-
Reckon this can be done?
Ok, so I really like the look of the newer pajeros (NP, NS, NT) but I HATE that they're totally independant suspension. SO, what I want to know is, has anyone done, or looked into SAS conversions on these pajeros? Would it be hard? Am i being stupid? It would just be pretty sweet to see something other than a Patrol or LC for a change.
Yes I believe you could SAS the front & rear.
Even though it's a unitary construction you still have the main chassis rails that the body is attached to directly.
You could still use these chassis rails as the mounting points for the radius arms, spring perches etc.
The biggest issue would be the steering IMHO and getting the geometry right.
I've seen a Jeep Cherokee (unitary construction) have a front SAS done (the rear was already solid axle) - worked quite well but again the steering was the biggest drama. That project cost the owner $40K but it was whiz bang and really a show truck rather than a track monster.
Even though it's a unitary construction you still have the main chassis rails that the body is attached to directly.
You could still use these chassis rails as the mounting points for the radius arms, spring perches etc.
The biggest issue would be the steering IMHO and getting the geometry right.
I've seen a Jeep Cherokee (unitary construction) have a front SAS done (the rear was already solid axle) - worked quite well but again the steering was the biggest drama. That project cost the owner $40K but it was whiz bang and really a show truck rather than a track monster.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 24 guests