G'day,
Have gone and put a 355 stroker in the GQ nissan mid wheel base and want to know peoples ideas on sealing the distributor against water ingress. I have considered just running a sealant around the dizzy cap to help seal. Have also considered running a few PSI of air into the cap when doing deep water crossings. Pros or cons of each ?
Are there any other gems out there that people might want to share ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sealing the holden 5 litre distributor against water
re
hey bud ive got the same conversion and i sealed up the 3 breather holes in the bottom of the dizzy and put in 1 fitting and ran it into the cab then used silicone on the cap works a treat, had it idling underwater on the w.e lol
Who is online
Users browsing this forum: No registered users and 85 guests