Hello to you all, just joined and found this site very usefull,
but got a question for you,
i've got a L200 i'm trying to find a 28 sline 8" front diff so i can run a ARB in it,
drove 150miles yesterday to pick up what i thought was what i'd been looking for,
it was 28 spline and the right ratio 4,875 but when i got it home it was a 7.25" diff,
i thought all the 28 splined diff's were 8"
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
8" front diff
Moderator: -Scott-
Welcome to the board as long as your not a Dipper supporter
No mate their not.
Earlier low pinion 7.25" front diffs were 25 spline later ones were 28 spline.
As far as I can tell the change was made around the late 80's / early 90's.
The good news is that all 8" front diffs are 28 spline
No mate their not.
Earlier low pinion 7.25" front diffs were 25 spline later ones were 28 spline.
As far as I can tell the change was made around the late 80's / early 90's.
The good news is that all 8" front diffs are 28 spline
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests