rangie seats

Post by **team_little_legs** » Fri Mar 20, 2009 1:52 pm

gday just woundering if anyone has fitted different seats in a 2 door rangie? I would like to fit racing seats in mine but am not sure what to do about the seat belts.

any ideas ?

Post by **cloughy** » Fri Mar 20, 2009 1:59 pm

Bolt them through the B pillar

Post by **mu-stu** » Thu Mar 26, 2009 10:12 am

Early Disco seats slide right on.

The fella who owned the rangie before me put the drivers side belt up on the B pillar and I've since got rid of the original Rangie seat for the Disco one but apparently the seat belt change would need to be engineered so I was considering getting a 2 door seat again until I can get some money for a roll cage harnesses,etc and then engineered.

Post by **wolfengo** » Thu Mar 26, 2009 11:28 am

Put harnesses in ive got them in my rangie

Post by **team_little_legs** » Thu Mar 26, 2009 1:13 pm

yeah i have a set of disco 1 seats with bases
so i will probley end up fitting them

thanks for the help

Post by **mu-stu** » Thu Mar 26, 2009 1:30 pm

You shouldn't even need the bases unless you still need access into the rear (if they bases are from a 3 door Disco, then they should have a tilt function, I believe)

I kept my original base and just slide the new seat on.

Post by **team_little_legs** » Thu Mar 26, 2009 2:07 pm

yeah my disco 1 seats are out of a 4 door so they dont have the tilt
but ill still use them because the bases in the rangie are a bit passed there used by date

or i was thinking to just fit racing seats.
Would any one know the price of 2 monza racing seats ?

Post by **6.5 rangie** » Thu Mar 26, 2009 9:52 pm

ritters used to do a kit that bolted the seatbelt onto the b pillar, it was a steel bar that slid up in the pillar that you could bolt the belt to, infact i have them on my old 4 door, but unfortunately it is now on a trailer on a journey to the scrap metal place tomorrow!

Post by **team_little_legs** » Fri Mar 27, 2009 6:54 am

any idea where i could buy this kit from ?

Post by **wolfengo** » Fri Mar 27, 2009 2:28 pm

Hey team little legs

My racing seats which are monza autotechnica are around about $350 each and the harnesses were $100-$110 i think.

Ive seen the seats advertised, they might of gone down in price as i have seen them bout the $300 mark.

Post by **6.5 rangie** » Fri Mar 27, 2009 6:31 pm

team_little_legs wrote:any idea where i could buy this kit from ?

ah ritters

, actually i bought the last one 5 years ago, if you pm cloughy, he'll be able to tell you which scrap yard he took my car to that had them in it

Outer Limits 4x4 Board

rangie seats

rangie seats

Who is online