Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

stupid question????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 83
Joined: Sun Aug 03, 2008 4:46 am
Location: Canberra

stupid question????

Post by madbunyip »

I know this is a stupid question but why doesn't anybody weld shocks together??? end to end ???? :? :?
03 TJ sport skyjacker/warn stuff and some bling :) - been around Jeeps before, this is my 1st,
NOW I UNDERSTAND :)
Top
Posts: 1072
Joined: Sat Aug 26, 2006 6:04 pm
Location: Melbourne

Post by Weiner »

Cause that would be stupid, well it sounds stupid, just cable tie them together
'89 Hilux Single Cab - 3RZ, 35" Kreepy Krawlers, 4.88's, F & R Air lockers, RUF, Longfields, TG Highsteer, Highmount and no money
Top
Posts: 62
Joined: Mon Dec 05, 2005 9:20 pm
Location: A.C.T

Contact:
Contact crazy60

Post by crazy60 »

i know it sounds stupid, just dont know why??, has anybody tried
GQ LWB ,4" lift ,lsd rear, 33"BFG MUDDIESl
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

They blow up when you weld them, thats why.

Some blokes can do it but its rare. I have seen Billstiens repaired but thats the only brand that I have seen as they can be done while dismantled.

Most shocks are throw away sealed items.

The heat can also bugger the seals & ruin the viscosity of the oil.

Edit: why would you want to weld them end to end, they would work wierd one would think?
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 83
Joined: Sun Aug 03, 2008 4:46 am
Location: Canberra

Post by madbunyip »

Yes i have a 4x rancho 5000's but there short - 1 pair already have the pin on the shaft end cut off and replaced with eye, so becuase the very end of the shaft is the bit I was thinking of welding no to much heat would transfer to the other end where the gas is, the one's that i have didn't explode, and yes it does sound like it would work weird but why??? I'm thinking of mega length, and as per normal shock's if your spring set up is bump stopped correctly the shock will not top/bottom out
03 TJ sport skyjacker/warn stuff and some bling :) - been around Jeeps before, this is my 1st,
NOW I UNDERSTAND :)
Top
Posts: 83
Joined: Sun Aug 03, 2008 4:46 am
Location: Canberra

Post by madbunyip »

crazy60 wrote:i know it sounds stupid, just dont know why??, has anybody tried
as per crazy60 asked has anybody tried so they can tell us why it sounds stupid
03 TJ sport skyjacker/warn stuff and some bling :) - been around Jeeps before, this is my 1st,
NOW I UNDERSTAND :)
Top
Posts: 242
Joined: Wed Mar 19, 2008 10:56 pm
Location: Brisbane

Post by stockhorse »

easier to thread the ends and use a coupler to join them. makes replacement easier too.
Top
Posts: 83
Joined: Sun Aug 03, 2008 4:46 am
Location: Canberra

Post by madbunyip »

stockhorse wrote:easier to thread the ends and use a coupler to join them. makes replacement easier too.
does that mean you'v tried it???
03 TJ sport skyjacker/warn stuff and some bling :) - been around Jeeps before, this is my 1st,
NOW I UNDERSTAND :)
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I'd guess to say that two shocks are dearer than one the right length and not everyone has another set of good condition shocks lying around. Shocks are generally stuffed after 50000km if you believe the suspension experts. That said even if you did do it then it would ride very wierd with two different valved shocks and even exactly the same valving would be wierd too I would think.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 83
Joined: Sun Aug 03, 2008 4:46 am
Location: Canberra

Post by madbunyip »

well I need longer shocks, but won't be going to "EXTREAM BODGETECH PERFORMANCE",.... would be good to see though :?:
03 TJ sport skyjacker/warn stuff and some bling :) - been around Jeeps before, this is my 1st,
NOW I UNDERSTAND :)
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

would having multiple shocks with multiple moving points create to much flex through the length causing faster wear on seals etc etc.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 142 guests