Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Baleno motor question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 43
Joined: Wed Apr 16, 2008 9:29 pm
Location: Tassie

Baleno motor question

Post by Mike E »

Has anyone installed a baleno motor that runs a distributor instead of a coil pack into a sierra? What would be involved making the distributor fit?
I have tried searching but every baleno conversion i could find used a coil pack motor.

Cheers
Mike
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Search and use the bible about fitting a G16B out of a Vitara, same engine pretty much.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

You will need a vitara camshaft and distributor swapped in to the baleno head.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 43
Joined: Wed Apr 16, 2008 9:29 pm
Location: Tassie

Post by Mike E »

Is it possible to use a different distributor cap and rotor or some sort of angle drive set up like people use on gti motors?
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

What are you trying to work out? Do you have a baleno dizzy motor and you're trying to make it work? or are you trying to avoid using a coil pack motor (because if so, I'd use the coil pack motor)

I'm not aware of any conversion so you'd have to do some custom work. Maybe the Mazda GTX (?) cap night help a bit, but I've seen a swift G 16B in a sierra and the whole distributor was in the cab, not just the cap.

I'd still say that by far the easiest conversion will be a vitara dizzy and cam - should be pretty easy to come by.
Last edited by Gwagensteve on Mon Mar 30, 2009 9:06 am, edited 1 time in total.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

Baleno coil pack motors are way cheap..And easier to fit then the dizzy one.(less mechanical bits swaping over)

But if i had the dizzy motor already, i would get the vit cams and dizzy.

My options were

Coilpack baleno motor 1.6
90' Dizzy Vitara motor 1.6

Dizzys coming straight out of the head into the firewall will look like poo.
I am Tim
Posts: 43
Joined: Wed Apr 16, 2008 9:29 pm
Location: Tassie

Post by Mike E »

i would get a coilpack motor but the local wreckers want 3 times as much for it as a dizzy motor and vitara 1.6s are rarer than hens teeth down here.
I'll have to look into the vitara cam and dizzy option, is there anything else i should swap over while i'm at it?
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

well thats poo.. Damn baleno motors alone are 600 ere..or 450 for me :finger:

But from a wreckers that i dont know, My 1st coilpack motor with all wiring was 1090.
I am Tim
Posts: 166
Joined: Mon Dec 27, 2004 10:21 pm
Location: BrisBane Queensland Au

Post by tanshi »

i got a mate who just picked up a 1.6 efi grand vitara setup for 1100 ish 2005 model :D
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

tanshi wrote:i got a mate who just picked up a 1.6 efi grand vitara setup for 1100 ish 2005 model :D

Yep, now I just gotta get my arse into gear :D

That price included them doing all the removal, and delivery!!!

Interestingly the ECU is different to the earlier (2002ish) Baleno ECU. It has an extra plug!
Wheeling on completely wicked angles, without even looking stable.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

they still want 2500 for vit motor here that why i bought from sydney. 1500 for vit frontcut.

mind u i do have mostly all of the baleno stuff here also, only missing the block as it was fubar.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests