Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Questions? WMS to WMS?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Diff Questions? WMS to WMS?

Post by Remydog05 »

Just a couple of questions I couldnt find in the bible?

What is the width of a Rangie/Disco Diff? EG from WMS (Wheel mounting Surface) to WMS?

Is it from 94 that the stronger 24 spline Axels,etc came in?

So 80's rangies would be 10 spline?
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 100
Joined: Mon Jun 23, 2003 9:05 pm
Location: Rosvale Qld (south of 'Switch)

Re: Diff Questions? WMS to WMS?

Post by mu-stu »

Remydog05 wrote:Just a couple of questions I couldnt find in the bible?


So 80's rangies would be 10 spline?
Definitely (unless they've been upgraded sometime in the past)

Not sure about the other bit though.
2003 4.7lt V8 Jeep Grand Cherokee Laredo
1981 3.5ltr 2dr Range Rover
------------------------------------------
Welcome to Australia - the nanny state!
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

WMS about 61" for RRC and disco.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

1556mm for a 24 spline disco rear axle.

So yeah, 61 inches.
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Thanks All

Is it right that Rangie and Early Disco had the 4link and the later ones had the knuckle looking Aframe type setup?

Which is best?
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Remydog05 wrote:Thanks All

Is it right that Rangie and Early Disco had the 4link and the later ones had the knuckle looking Aframe type setup?

Which is best?
They are all the same.
Early rangies (before they had sway bars) had a third spring in the rear, a self-leveller working in the middle of that A-frame.

The three link rear suspension they use is the same as a triangulated 4 link.
Top
Posts: 567
Joined: Fri Nov 10, 2006 7:51 pm
Location: Victoria

Post by Remydog05 »

Thanks !!!!!!
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 41 guests