Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Upcoming timing belt change - what to ask for?
Moderators: toaddog, Elmo, DUDELUX
Upcoming timing belt change - what to ask for?
Hi
I am about to get my timing belt done and want to know if there is anything else i should be getting done at the same time.
98 3L D Hilux
Cheers
Dane
I am about to get my timing belt done and want to know if there is anything else i should be getting done at the same time.
98 3L D Hilux
Cheers
Dane
If it's only it's first belt (100,000k's) just do the belt.
if it's up for it's second (200,000k's) do a T - Belt Kit comes with tensioner, idler pulley and seals, but as already said use genuine seals the aftermarket ones leak, and yea also replace the water pump.
The second one always cost more! i'm almost due for a third!!!
if it's up for it's second (200,000k's) do a T - Belt Kit comes with tensioner, idler pulley and seals, but as already said use genuine seals the aftermarket ones leak, and yea also replace the water pump.
The second one always cost more! i'm almost due for a third!!!
Resident Terrorist
Sorry but I would do the full kit and pump even on the first 100,000km. I've rarely seen a water pump go a full 200K without leaking. Same goes for oil seals and pulleys. Do it all and save yourself the hassle (and labour if you're paying someone) of doing it again for another 100,000km.mosus wrote:If it's only it's first belt (100,000k's) just do the belt.
if it's up for it's second (200,000k's) do a T - Belt Kit comes with tensioner, idler pulley and seals, but as already said use genuine seals the aftermarket ones leak, and yea also replace the water pump.
The second one always cost more! i'm almost due for a third!!!
That's fair enough.
If you where doing it buy the logbook or most repair manuals/guides the belt only needs doing on the first hundered. and there is a big difference in price between fitting just a belt and doing a kit and pump as well.
I Have seen many water pumps go well over 200,000k's and rarely see any needing replacement under 100,000k's maybe on well neglected vehicles.
But each to there own and maybe we work on different vehicles was just giving an opinion and advice.
If you where doing it buy the logbook or most repair manuals/guides the belt only needs doing on the first hundered. and there is a big difference in price between fitting just a belt and doing a kit and pump as well.
I Have seen many water pumps go well over 200,000k's and rarely see any needing replacement under 100,000k's maybe on well neglected vehicles.
But each to there own and maybe we work on different vehicles was just giving an opinion and advice.
timing belt
simple just ask DANOS how many ks it got and then we will be able to give him the right advice not just guesting
hilux dualcab white
hmmm, im about to hit 300 and have no idea whats been done before, so i better do the lot and know its done.
how hard is it to do it your self and keep the timing etc the same?
how hard is it to do it your self and keep the timing etc the same?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Its pretty easy, I did my first one in a day with a lot of buggering around. Just need to line up all the timing and your sweet.thehanko wrote:hmmm, im about to hit 300 and have no idea whats been done before, so i better do the lot and know its done.
how hard is it to do it your self and keep the timing etc the same?
It took me a few goes to get it spot on, as sometimes the teeth of the belt dont sit properly in the pulley and it skips a tooth. You just manually turn the engine over and make sure they still line up.
Definately do all the seals and tensioner/bearings while its all out. You'll need a puller to get the balancer off though.
Have a shot at it and save a coupla hundred bucks.
with my lux i did the idler/tensioner arrangement , pump , seals and belt wile i was there , then you dont have to remove that bloody cover for another 100,000 kms , oh what a feeling. btw... as for 200k on a waterpump... my current cruiser has been in the family since new.. 389K still same pump... not leaking. (touches wood)
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)
What torque? Tighten it till it strips and then back it off half a turn.
What torque? Tighten it till it strips and then back it off half a turn.
ive had 2 '3L's now. Both spat the crankshaft seal at 295,000 and 297,000. Ive also had a mates throw his at 302,000. Hopefully this is enough indication for you guys.
YOU ARE STUPID not to change the timing belt at least everytime you have the cover off. they are the most important part of your car. 200,000 change overs do your camshaft, crankshaft seals, water pump, and idler and pulley bearings.
Why half ass it?
YOU ARE STUPID not to change the timing belt at least everytime you have the cover off. they are the most important part of your car. 200,000 change overs do your camshaft, crankshaft seals, water pump, and idler and pulley bearings.
Why half ass it?
With the hilux 3l kit's i have fitted they haven't come with the idler only the tensioner and so on. you can however change just the bearing in it which any bearing shop will have.mosus wrote: if it's up for it's second (200,000k's) do a T - Belt Kit comes with tensioner, idler pulley and seals, but as already said use genuine seals the aftermarket ones leak, and yea also replace the water pump.
plenty of parts on the bench
Who is online
Users browsing this forum: No registered users and 4 guests