Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5 spd gear box to 4spd MQ owners or buffs plz help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 3
Joined: Mon Apr 06, 2009 12:23 pm
Location: perth WA

5 spd gear box to 4spd MQ owners or buffs plz help

Post by vito_mightyMQ »

i blew the 5 spd in my shorty MQ and it has taken me 6 months to find a gear box that is under $1000 i bought a whole 82 shorty with a 4 spd will it fit straight into my 84? also how can i remove the box the easiest by myself? and also i have a v8 in my 84 can i reuse the bell housing?
Last edited by vito_mightyMQ on Mon Apr 06, 2009 2:42 pm, edited 1 time in total.
Top
Posts: 126
Joined: Sun Jul 20, 2008 6:57 pm
Location: Frankston

Post by SWBMQCraig »

Sorry mate but bad news.. the gearbox mounts are about 10cm different 4 speed to 5 speed and also the shifter is in a different spot.. you will need to cut off the mounts and move them and probably notch out the floor or bend the gear lever to make it fit.

Craig
Top
Posts: 3
Joined: Mon Apr 06, 2009 12:23 pm
Location: perth WA

damn

Post by vito_mightyMQ »

can i still use the tail shafts from my 5spd still ? any ideas who can look at my 5spd and tell me if its blown for cheap? it fell out jumping in a carpark or any ideas how to fix this problem??
Top
Posts: 126
Joined: Sun Jul 20, 2008 6:57 pm
Location: Frankston

Post by SWBMQCraig »

nah forgot that the 5 speed tailshaft is shorter than the 4speed cos the 5th gear added length to the gearbox.. sorry im on the other side of the country to you.. think it might just be best to go to a gearbox place..

Cheers Craig
Top
Posts: 3
Joined: Mon Apr 06, 2009 12:23 pm
Location: perth WA

any one?

Post by vito_mightyMQ »

is it worth putting my 5spd back in to see if its working ?? stupidly i took it out b4 finding out about it there were only 3 fingertight bolts holding the bellhousing on to the 308 and when i gear down (compresion lock up) like a jake brake in any gear it felt like a grinding and it would pop out of gear.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest