Anyone replaced one?
Do you need to take the dash apart/off, or are there any special tricks to make it easier. I had a look from under the dash and I can see where the cable screws in but my hands are too fat to get in there
And on the gearbox end, where will it be? Haven't had a chance to look around for it yet.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series spedo cable
Moderators: toaddog, Elmo, DUDELUX
60 series spedo cable
60 + Turbo, 33"s :armsup:
Unscrew the dash face and it is held in behind the speedo via a clip. Press either side and it slides out. When your putting it back in, make sure it's clipped in by pulling on it. You don't want it to come undone after you've put the dash back in.
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
Once you get it off behind the speedo it goes through a grommet just in front of the gear stick. It then connects to the gearbox on the passenger side.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Resident Terrorist
Re: 60 series spedo cable
You wont find it on the gearbox. It goes onto the transfer case, just to the left of the tailshaft flange. Simply unscrews. Might need some multigrips if its tight.RockyF75 wrote: And on the gearbox end, where will it be? Haven't had a chance to look around for it yet.
Re: 60 series spedo cable
Ah yeah, transfer case, not gearbox.....RAY185 wrote:You wont find it on the gearbox. It goes onto the transfer case, just to the left of the tailshaft flange. Simply unscrews. Might need some multigrips if its tight.RockyF75 wrote: And on the gearbox end, where will it be? Haven't had a chance to look around for it yet.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Who is online
Users browsing this forum: No registered users and 1 guest