hey,
Can you be able to swap front leaf springs on a hilux to a coil conversion and leave the rear as leaf springs?
And i see on most truck, but not the hilux the leaf springs are installed under the diff than on top, why is this ???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suspension question
Moderators: toaddog, Elmo, DUDELUX
you cna dude, but it will cost lots of biscuits, radius arm is the most simple way, but i still dont think its the best way to go offroad, on road it is fine!!
hilux has SOA due to the design, it has advantages and disadvantages, the SUA setup is far more durable, and can carry more weight in the eyes of the transport department, it also allows the vehicle to sit lower?!?!
hilux has SOA due to the design, it has advantages and disadvantages, the SUA setup is far more durable, and can carry more weight in the eyes of the transport department, it also allows the vehicle to sit lower?!?!
hands and mums dont count!!!
Julian, werent you having trouble with a rusted out cab? now you want coil springs. Here is what i would look at doing if i were you, find an old prado that is solid coil front and then swap a hilux cab onto it, i have been told that the chassis are almost identical and considering you are in NZ there should be a jap wreckers that you can get one from cheap.
As far as coil swaps go i know of one guy that had one done (not surfection) and they used a coil bundera front end into a 2000 dualcab lux, the conversion, not including parts was $7300, add parts and you would be looking at close to $9000, if you could do it yourself then you could get away for around $1000 but i will agree with every one else and say it is a waste of time and effort.
NICK
As far as coil swaps go i know of one guy that had one done (not surfection) and they used a coil bundera front end into a 2000 dualcab lux, the conversion, not including parts was $7300, add parts and you would be looking at close to $9000, if you could do it yourself then you could get away for around $1000 but i will agree with every one else and say it is a waste of time and effort.
NICK
TECH SCREW GURU
Who is online
Users browsing this forum: No registered users and 2 guests