Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Silly winch rope question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 28
Joined: Sun Feb 17, 2008 8:32 pm
Location: Melbourne, Victoria

Silly winch rope question

Post by woodys72 »

Might seem like a silly question but I did some searching and couldn't find anything...

Normally snatch blocks are used for wire winches, can you use a snatch block on a synthetic rope winch? It will feed through, but will it damage the rope at all?

Cheers
Top
Posts: 845
Joined: Sun Dec 17, 2006 8:28 pm
Location: Bairnsdale, East Gippsland

Post by jet-6 »

Yer you sure can use them, but if it has burrs from being used on old steel rope it needs to be repaired to smooth before you use it
Top
Posts: 28
Joined: Sun Feb 17, 2008 8:32 pm
Location: Melbourne, Victoria

Post by woodys72 »

jet-6 wrote:Yer you sure can use them, but if it has burrs from being used on old steel rope it needs to be repaired to smooth before you use it
Just what I wanted to hear! I have a couple of brand new unused snatch blocks and was looking at buying a winch with rope, but didn't want to buy a winch with rope and find out I couldn't use a snatch block!

Thanks for the reply
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 12 guests