Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear lux discs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

rear lux discs

Post by stock 4runner »

just finished fitting my rear discs but cant seem to get all the air out of them.
i used 80 series front lines to join the old lux lines to the subaru calipers. has any one had this problem before ive been through 2 bottles of brake fluid and still the same. is it possible there is an air lock some where
Rims flipped from $50
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

are you sure its air? not a leaky master cylinder or similar allowing pressure to dissipate.

describe what the same is.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

i have used the same type of caliper on another vehicle and same problem. i ditched them for pintara rears, they are sooo much better.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

air

Post by stock 4runner »

pritty sure its air as it did not do it with the drums last week
Rims flipped from $50
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

you may have to unbolt them and bleed them in a better postion. had this prob on a datto with diff brakes
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

thanks

Post by stock 4runner »

thanks for the help guys all sorted now turned out the callipers where just chewing more fluid then the drums did makeing so it had lots of pedel travel so i thought they had air.
adjusted the push bolt on the pedal and its all sweet got a short hard pedal and great breaks.
hey Rory would i be right in saying you know of some one who approves cross over steering
Rims flipped from $50
Posts: 837
Joined: Sat Aug 16, 2008 5:41 pm
Location: out playin

price

Post by stock 4runner »

just in case any one is interested thought i would put up some prices as it a nice conversion and cheep as to do for what you get all up you can do it for $260 mines was only $210 as i made my own brackits as my diff has too muck bracing to run a bought set
calipers $130 pair
rotors $50 pair (actually was a 1125 rum)
break lines $20 pair from wreckers
high tensile bolts $10 (the wreckers didnt give me the bolts to bolt the caliper on)
set of brackits $50 (from roctoy but i made my own)
Rims flipped from $50
Posts: 45
Joined: Mon Sep 22, 2008 8:25 pm
Location: Kallangur / Moranbah

Post by ljboons »

Its under the bonnet son.
Glad to see it worked out well. Now the handbrake.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests