Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wheel offset questions URGENT

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 143
Joined: Tue Oct 16, 2007 7:58 pm
Location: beaumaris - Victoria

wheel offset questions URGENT

Post by andy1517 »

guys,

about to buy some new wheels for my motorbike trailer.

I currently have 165mm off backspace from the axle to the spring hanger.

The wheels i am looking at acquiring are 18"x8", with 225 tyres fitted. The offset on the wheels are +35.

Will these wheels fit my Trailer????
94 zook, 2" body lift, 30.5" bfg muddies, custom bar, warn 8000, 240 XGT's, extractors and 2" exhaust.
Top
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Post by simkell »

should leave about 30mm between rim and spring assuming that the 35mm is from the center line of the rim.
MUD, MUD, GLORIOUS MUD!
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Should put the centreline of the wheel 130mm from the spring. I agree with simkell - about 30mm clearance to the rim, 15 - 20mm to the tyre sidewall.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I would put the inner rim of the wheel about 30 mm from the spring as well, positive offset brings the wheel in closer to the centre of the axle.

Cheers
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests