Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Grand Vitara lifts and big wheels?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 81
Joined: Sun Mar 29, 2009 2:37 pm
Location: Perth

Grand Vitara lifts and big wheels?

Post by supersean89 »

How far can you go with lifting a 1998-2001 GV and putting bigger tyres on it?

And aproximatly how much would I be looking at it costing?

I would also be open to getting new rims, to fit wider tyres etc...

Thanks :D
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

Calmini 3 inch is as big as you get. Body lifts are a super pain on them because of the steering linkage, Ive done 2 bodl lifts and not something id recomend.
Tyre size is a hassel aswell, you can get hight but the wheel arch dosent allow much bigger for compression and turning without modifing gards.I think 2 profiles bigger is close to the limit.
From my understanding calmini only make a kit for the type 1 98-2000 grandie, the front diff mounts changed after thet though im sure you could remake the brackets required if you want that sort of lift.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

The Calmini kit is a 2.5" lift not 3" and it fit my 2001 GV well, they make three differnt kits just get the right one.

I have done a 1" body lift and would not go any higher for the same reasons as scooby_74 said.

I ran 255/70 R16 mudders on the stock alloys, had to do some cutting of the plastics and they did scrub a little at full lock but thats the idea :D if they dont scrub you can fit bigger ones :armsup: only issue is you can not fit anything bigger on the rear door with the standard bar.

Have a look at by link below and you can see mine there are some pics with the Calmini kit in it
LWB Vit, Trail Slayer
Posts: 7
Joined: Sat Apr 04, 2009 5:08 pm
Location: perth

Post by prestage »

interesting.. is calmini the best brand for suspension?
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

Image
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 21
Joined: Mon Aug 11, 2008 5:55 pm
Location: Brisbane

Post by Beginner4x4 »

mine is not that extreme ive got a 2.5 inch tough dog lift with 225/70/16 MT on the standard rim tiny bit of rubbing on full lock nothing to worry about tho

http://www.outerlimits4x4.com/sutra1532 ... t=#1532367


this thread might help you also [/img]
Luxury mini 4x4 :D
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

Calmini make the biggest lift you can buy off the shelf.

I wouldn't say they do the best springs and shocks just the biggest
LWB Vit, Trail Slayer
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

[quote="Toecutta"]The Calmini kit is a 2.5" lift not 3" and it fit my 2001 GV well, they make three differnt kits just get the right one.



Interesting the supplier here in the west recons that you can only get the kit for a type 1 grandy, I hav a couple of customers with 05 type 3s that he recons he can not supply the kit for. Ill have to re question him.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Posts: 81
Joined: Sun Mar 29, 2009 2:37 pm
Location: Perth

Post by supersean89 »

wow zooks look sweet when they have been lifted.

is there a rule about not being allowed to talk prices on the forums?
not even an aprox figure of how much it would cost.. ie 2 grand?
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

supersean89

Posted: Sun Apr 12, 2009 12:22 am
wow zooks look sweet when they have been lifted.

is there a rule about not being allowed to talk prices on the forums?
not even an aprox figure of how much it would cost.. ie 2 grand?
it would be easier to say what your budget is...you could spend heaps building up your car, or a keep it on a small budget and do it up over time.

rims are around $70 ea for plain steel with an offset.
tyres (28s-30s) about 190-250, depending on brand/size
do a search on the calmini kit, probably around a grand or so + install unless you fit it yourself
4age zook ute in lots of bits
Posts: 81
Joined: Sun Mar 29, 2009 2:37 pm
Location: Perth

Post by supersean89 »

well my budget is quite flexible.. Porbably to start of with i would spend 2-3 grand.. but i would save up over time and get more stuff done.
I would prefer to get the lift done 1st.

so calmini is the biggest lift? i have seen them online, for a bit over a grand i think. but i have seen Tough Dog lifts for the Vit too. they were way cheaper, but i think i was not looking at the whole package or sumthing. just the shocks.

Who do u recomend to install?

Any websites that u recomend to look at rims?
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

interesting that calmini is the biggest but not necessarily the best. I'd be interested to know what provides the best compromise between lift and articulation.
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Posts: 81
Joined: Sun Mar 29, 2009 2:37 pm
Location: Perth

Post by supersean89 »

can you get lifts from differnet brands.. im not too fussed about "quality" as long as it doesnt break. Im not going to be doing really extreme 4wding..
Posts: 376
Joined: Tue Oct 10, 2006 12:25 pm
Location: bris

Post by fordy1 »

thanks everybody for mentioning me :D

you can do a 3 inch front and 4 inch rear
( rear can go higher but looks funny with the front )

i have been running 225/75/16s with no problem and have been thinking it would be nice to go bigger

Kit legal - $1650 3/4inch

Image

Image

body lifts are for non airbag vehicles

good luck with your GV

tim
www.outdoorauto.com.au
www.outdoorauto.com.au - we love doing new GVs....
Posts: 81
Joined: Sun Mar 29, 2009 2:37 pm
Location: Perth

Post by supersean89 »

where do you pick up the 3/4 inch lift from? looks nice with that lift :)

does it reqiure other mods with that kind of lift?

thanks for the help guys :D
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

Its his lift :lol: , check out outdoor autos, the link in the sig :D
scooby_74 wrote: Interesting the supplier here in the west recons that you can only get the kit for a type 1 grandy, I hav a couple of customers with 05 type 3s that he recons he can not supply the kit for. Ill have to re question him.
Have a look here

http://www.puresuzuki.com/2.5%20Lift.htm

VEHICLE PART NUMBER
1999-03 Vitara / GV / Tracker SK19800
2001-03 XL-7 SK19801
2004 Grand Vitara / Tracker / XL-7 SK19804

I had a 2001-03 Kit on my 01 GV

I am not sure if there is any big differences between the XL7 and GV between the years

I thought the 05 was the one with the full independent suspension. Different kettle of fish
LWB Vit, Trail Slayer
Posts: 81
Joined: Sun Mar 29, 2009 2:37 pm
Location: Perth

Post by supersean89 »

ohh wow.. so there are a few ppl who make the GV lift :)

now how much for instalation? who can install? any mechanic? or does it have to be a 4wd specialist?
Posts: 21
Joined: Mon Aug 11, 2008 5:55 pm
Location: Brisbane

Post by Beginner4x4 »

now that we have got a little forum for grand vitaras

i also need to get the front axel seal replaced and the diff carrier is worn so i was thinking when that is all out is it just worth putting in airlockers for the front or just stick to manual hubs? if any??
if i was to put airlockers in i would get the rear done as well
has anyone done this to a GV yet ?
how dose it go ?
i know i will cost a little bit :shock: but kevins money will help out a little bit
Luxury mini 4x4 :D
Posts: 21
Joined: Mon Aug 11, 2008 5:55 pm
Location: Brisbane

Post by Beginner4x4 »

and also were do would i attach toe points to???

pictures would be awesome
Luxury mini 4x4 :D
Posts: 38
Joined: Sun Jul 27, 2008 10:57 am
Location: Brisbane, Australia.

GV Lift

Post by Mugwui »

Be careful and choose wisely!!! Look around at everything and then make your conclusions.
I got told that this could not be done,
http://www.auszookers.com/index.php?nam ... sc&start=0

Obviously it can. It all depends on how far you want to go.
99 LWB V6 GV, 2"BL, 2" Suspension Lift, Coil Spacers,
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

buy a 3 inch lift then smack some 50mm poly spacers above the springs for an extre 2 inches, but you will need to put 50 mm strut spacers in to lower your front struts and 50mm pins on your rear shocks to extend them as well so you keep your down travel, you should also extend your bump stops...
Posts: 376
Joined: Tue Oct 10, 2006 12:25 pm
Location: bris

Post by fordy1 »

:shock: have you actually done this? :lol:


4 inch in the rear is the highest before you have to do the brake lines and drop the transfer case in the rear and dont get me started on the front!

Image
www.outdoorauto.com.au - we love doing new GVs....
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

not to mine but seen it on a gv... and wanted to know cause looking at updating from the 94 vit..

brake lines f/r also extended, tansfer was dropped 1 inch, custom tailshafts with slip yolk f/r, front diff drop 3 inch he got the brackets custom made, and for some reason he dropped the front calmin lower control arms an extra 1 inch with custom brackets to level out his cv angle...
Posts: 859
Joined: Sun Nov 12, 2006 1:49 pm
Location: Adelaide Hills S.A.

Post by atari4x4 »

danssurf82 wrote:not to mine but seen it on a gv... and wanted to know cause looking at updating from the 94 vit..

brake lines f/r also extended, tansfer was dropped 1 inch, custom tailshafts with slip yolk f/r, front diff drop 3 inch he got the brackets custom made, and for some reason he dropped the front calmin lower control arms an extra 1 inch with custom brackets to level out his cv angle...
wouldn't dropping the control arms would make the cv's on more of an angle??
---------===== LOWRANGE JUNKIE =====---------
atari4x4 build up ~ MT/R 31's, calmini, body lift, j20a, 5.12 r&p + other stuff ~
http://www.outerlimits4x4.com/viewtopic ... 6&t=162392" onclick="window.open(this.href);return false;
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

thats what i was confused about... i would of thought it would also throw your camber way out of whack..
Posts: 376
Joined: Tue Oct 10, 2006 12:25 pm
Location: bris

Post by fordy1 »

so you dont just whack in some 50mm coil spacers and some strut/shock spacers on top of a 3inch lift and be done :roll:
www.outdoorauto.com.au - we love doing new GVs....
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

danssurf82 wrote:not to mine but seen it on a gv... and wanted to know cause looking at updating from the 94 vit..

brake lines f/r also extended, tansfer was dropped 1 inch, custom tailshafts with slip yolk f/r, front diff drop 3 inch he got the brackets custom made, and for some reason he dropped the front calmin lower control arms an extra 1 inch with custom brackets to level out his cv angle...
dropping the control arms would only help with camber angles and bring the track out to stock, will not help cv angles.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

fordy1 wrote:so you dont just whack in some 50mm coil spacers and some strut/shock spacers on top of a 3inch lift and be done :roll:
You do if you want to have problems though ;) :armsup:

I love it when you get told half a story as though that is it and then you find out that there is a lot more to it later :roll:
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 376
Joined: Tue Oct 10, 2006 12:25 pm
Location: bris

Post by fordy1 »

yes i agree CJ

would love to see pics of this GV with a 5inch lift........
www.outdoorauto.com.au - we love doing new GVs....
NFI
Posts: 25
Joined: Fri Jan 02, 2009 5:41 am
Location: Melbourne

Post by NFI »

Just to add my 2 cents worth.
When I had my 1999 V6 GV. It had the OME 40 - 50mm suspension lift with 225/75 R16 MTR's (29").

I also changed the Diff's centre ratio's to correct the speedo reading. I supposed it was raised 2" taller than stock.

The 3" lift from calmini is for the Vitara Estate the 98-2005 Grand Vitara is 2.5". From 2006, Suzuki went independent all round.
2009 Jeep Wrangler (Rubicon)
ARB lift and Bull Bar
Post Reply

Who is online

Users browsing this forum: No registered users and 77 guests