Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series front into hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

80 series front into hilux

Post by Bagdad mafia »

Hi all
Will a hilux diff centre fit in to an 80 series front housing ?

want to put coils in the front of my hilux using an 80 series front housing but want to keep my front locker and low pinion for clearance issues with my sump

Thanks
Gav.
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

yes 80 front diff is a hilux centre
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

so the stud pattern on the centre is the same then ?
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I thought they were different, right down to one being hi pinion and the other low pinion :?:
Top
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

my question is regarding me wanting to keep my low pinion for clearance with my sump and the extra width and coils
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

well a 80 high pinion goes into a lux housing.. so u would have to say that it would work the other way around!
Top
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

Thanks ray it's Gav here by the way
Top
Posts: 271
Joined: Wed Aug 30, 2006 8:15 pm
Location: LLANDILO N.S.W 2747

Contact:
Contact lukes4x4

.

Post by lukes4x4 »

it will bolt up but it wont work because the tierod will hit the diff centre.
LUKEYS 4X4 CUSTOMS - 0409 991742
LLANDILO N.S.W 2747 - SYDNEY
www.lukeys4x4.com
HARDCORE GEAR AND SUSPENSION
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Put the locker in the hi pinion centre from the 80 housing. Same locker.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

cant run a hi pinion because of the sump on my 1uz engine
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Can you mod the sump and pick up, shouldn't be too hard if you are doing a coil conversion.

Cheers
Top
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

thats one option

Was hoping to get the tie rod arms re-tapered to sit above the low pinion
Top
Posts: 255
Joined: Thu Mar 15, 2007 8:24 pm
Location: PENRIFF

Re: .

Post by SHANE055 »

lukes4x4 wrote:it will bolt up but it wont work because the tierod will hit the diff centre.
Wouldn't cross over steering fix this
Coil SASed 03 LUX 3.0TD
91 TD 80 series wagon
Top
Posts: 94
Joined: Thu Nov 13, 2008 2:07 pm
Location: tas

Post by Bagdad mafia »

cross over steer dont fit the 80 diff as the tie rod is behind the diff
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 21 guests