Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3L to 3LTE? using 2LTE EFI gear

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 210
Joined: Wed May 16, 2007 7:10 pm
Location: Geelong

3L to 3LTE? using 2LTE EFI gear

Post by VKYOOT »

Hey

Just looking for a simple answer.

Is it possible to use the injector pump/wiring/turbo etc off a 2LTE on a 3L motor to effectively make it a 3LTE?

Thanks

Jon
Top
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

It will all bolt on, would just be a case of adjusting the injector pump to suit the 3l.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Top
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

thats the news we want to hear.

now whens the working bee jon?
Top
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

wiring?? i am currently putting a 2L turbo set up on my car.
no wiring involved. just bolt on. or am i missing something?
95 lux, Under Construction..
60% of the time it works ALL the time
Top
Posts: 210
Joined: Wed May 16, 2007 7:10 pm
Location: Geelong

Post by VKYOOT »

2LTE....the E denotes EFI........diesel injected motor.
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Re: 3L to 3LTE? using 2LTE EFI gear

Post by tweak'e »

VKYOOT wrote: Is it possible to use the injector pump/wiring/turbo etc off a 2LTE on a 3L motor to effectively make it a 3LTE?
yes BUT its not simple to do.

biggest hassle is the crank sensor. the 3L doesn't have the bump on the piston rods for it. however you can get around that by welding a tag onto the front pulley and mounting the pickup beside it. need to make the pickup adjustable as it will need some fine tuning to get it in the right place.

then you will need to work out how to inject more fuel. tweak pump or bigger injectors etc.

plenty info on http://www.toyotasurf.asn.au/forum/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests