I have got two issues with my HJ60
1. Once the hubs engaged - I have a rattle / bearing noise in front end. Doesn't matter what gear t/case in. It's always there. Gets worse when loaded up.
2. Once I select 4L I can feel and hear the Transfer case or something else 'slipping' I can feel it through the transfer case lever, but it might be coming from elsewhere. It feels like I am loosing drive somewhere. I ave a bodylift but lever not fouling on body - been chopped away. Won't stay in 4H at all as soon as lift accelerator it pops out. 4L all good but 4h comes straight out
My mechanic suggested overhaul the t/case but can't find the noise in front end. He suggested a 4x4 mechanic with knowledge or drive train angles etc would be the way to go.
Want to get both sorted, who can I take it to in Brisbane? If case needs an overhaul i'd go reduction gears. Thanks in advance. Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4x4 MECHANIC IN BRISBANE NEEDED-TWO PROBLEMS
Moderators: toaddog, TWISTY, V8Patrol, Moderators
4x4 MECHANIC IN BRISBANE NEEDED-TWO PROBLEMS
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Try goodyear at springwood.John has always looked after me and his mechanic is fairly switched on.If something is over his head he wont just wade in costing you thousands either.He will subbie out anything that is beyond him
Cheers
Cookie
Cheers
Cookie
80 series dual cab full internal cage 5 inch lift GU diffs cutting brakes with front and rear lockers winch on 38's
A.G.Cook Excavator Hire 0429167911
A.G.Cook Excavator Hire 0429167911
Resident Terrorist
1: Definately get the front end checked out. Likely to be a broken free wheeling hub or possibly CV. It would need to be dismantled to diagnose.
2: If you are lucky it could just require adjustment of the high/low lever on the transfer. If this is not spot on it will jump out of 4H. I would definately try that first before looking to overhaul the transfer.
2: If you are lucky it could just require adjustment of the high/low lever on the transfer. If this is not spot on it will jump out of 4H. I would definately try that first before looking to overhaul the transfer.
For this sort of stuff I can recommend Redlands 4WD Centre, 30 Steel Street Capalaba 4157 3823 3990 http://www.redlands4wd.com.au/.
Talk to Peter Kitchin, if there is a problem he can find it. Peter looks after touring 4WDs as well as Competition Rigs. He himself competes in off road events.
Talk to Peter Kitchin, if there is a problem he can find it. Peter looks after touring 4WDs as well as Competition Rigs. He himself competes in off road events.
1985 FJ62 2" lift
2001 HJZ105 3" lift & locked
2001 HJZ105 3" lift & locked
Who is online
Users browsing this forum: No registered users and 1 guest