Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

i was told i could put a r31turbo on my mq i wont 2 no more

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 10
Joined: Tue Jul 17, 2007 5:23 pm
Location: redland bay

i was told i could put a r31turbo on my mq i wont 2 no more

Post by azzer »

hey all i was told i could take a turbo and manifold off a r31 and it would bolt up to my mq l28 engine and yea i just wont to no more if anyone can help
thanks aaron :?:
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

the L28 isnt a cross flow head.. so thats a big negative!
Posts: 89
Joined: Sun May 04, 2008 7:33 am
Location: Melbourne, Croydon

Post by Devious »

I think you mean R30 Skyline. In japan (and possibly NZ) they had a turbocharged, efi 'L' series engine. I think it was an L24et.

The R31 Skyline has the 'RB' series of engines, which are all cross flow.
1991 GQ lwb 4.2diesel.
33"Bighorns, ARB deluxe winch bar,sliders, brush bars, spotties, snorkel, lift...........
And now with TURBO LOVE!
AS SEEN ON YOUR RIG, 4WD TV EP 191...
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Devious wrote:I think you mean R30 Skyline. In japan (and possibly NZ) they had a turbocharged, efi 'L' series engine. I think it was an L24et.

The R31 Skyline has the 'RB' series of engines, which are all cross flow.
expanding, on this, and just an idea, you could look for a standard set of header of a VL commadore, or a skyline (both fitted with the RB30 motors) and see if they match/bolt up. IF! they do, well, the turbo mainfold will bolt up also....
Nice gq swb ute chop with a huffer for the good times
Posts: 25
Joined: Tue Jan 06, 2009 1:31 am
Location: Bunbury WA

Post by lysdexia »

the MQ has an L series. Not an RB30.

the R30 Skyline with the L20ET engine has the turbo (and efi) gear that you need.
Iain :|: Bunbury WA :|: '87 MK Ute SD33T :|: '87 Skyline Coupe RB20DET :|: '95 Aristo 2JZGTE
Posts: 10
Joined: Tue Jul 17, 2007 5:23 pm
Location: redland bay

thanks

Post by azzer »

cheers for the info ill keep lookin into it
Posts: 49
Joined: Fri Feb 08, 2008 8:23 pm
Location: Gold Coast

Post by Wrench_Pilot_86 »

the RB30 is just an off shoot from the L series, just get a R31 cheap give the motor the once over replace everything that needs it and bolt it into the trol, getting the car you get everything you need,

finding those L20ET manafolds, would be a chicken dance, i tried a long time ago for a Z24, they did exist but in 20 years theres not much left, except in someones collection that hasn't seen light for some years.

a RB30 install gets you that power boost you want as well as a turbo option later on, and RB turbo kits are a dime a dozen, cause all the little boys want the VL turbos
rear quarters are evil and must be punished with rocks
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests