Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cab mount bolts

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 7
Joined: Wed May 13, 2009 5:23 pm
Location: Mackay

cab mount bolts

Post by GaryS »

Just started a cab off chassis rebuilt on a 99 DX TD42 patrol. The problem I have is that some of the cab mount bolts are so rusted that one needed to be cut (front) one snapped (also front) and one spins when attaching a socket. The remaining end of the bolt on the cab side is impossible to get at. Has anyone had this problem before?
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

the front two are accesable by cutting the upright radiator supports.

The two under the foot wells will require a holesaw throught the floor to get to them.

The two rear ones need to have the seats removed and have a plastic cap over them which you need to remove to get to the body bolts
Top
Posts: 7
Joined: Wed May 13, 2009 5:23 pm
Location: Mackay

Post by GaryS »

Cheers MickyD, Basically thought as much, just hoping for some magic cure - looks like I will be friends with an angle grinder.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest