Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60series deisel not glowing (more searching done)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 129
Joined: Tue Oct 28, 2003 5:03 pm
Location: Sydney

60series deisel not glowing (more searching done)

Post by Rough60 »

Hi all,
yesterday was fine, but today the glow plugs seem to be swithing on then straight off and not heating up, was thinking relay, or should I be looking somewhere else?
Thanks.
Last edited by Rough60 on Mon May 18, 2009 6:49 pm, edited 1 time in total.
Top
Posts: 21
Joined: Mon Dec 10, 2007 6:01 pm
Location: Townsville

Glow mplug timer

Post by toms47 »

sounds like it may be ur glow plug timer
Top
Posts: 99
Joined: Sat Feb 09, 2008 6:44 pm
Location: Blue Mountains NSW

Post by howesy »

get a multi meter and test how long the voltage goes through to the plugs. I had one years ago where the new timer was so expensive I bypassed it to an switch and used to turn it on for a count of five or eight on cold mornings then turn off again and it started every time.
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

howesy wrote:get a multi meter and test how long the voltage goes through to the plugs. I had one years ago where the new timer was so expensive I bypassed it to an switch and used to turn it on for a count of five or eight on cold mornings then turn off again and it started every time.
did this with the 40. momentary switch from superheap and a few wires. i count to 9-10 on cold mornings and at it starts first crank every time. google ih8mud wilson switch , wiring should be similar for 2h.
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

shorty_f0rty wrote: , wiring should be similar for 2h.

you are correct there.
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 129
Joined: Tue Oct 28, 2003 5:03 pm
Location: Sydney

Post by Rough60 »

Tested with multimeter and no voltage going to the plugs, checked and replaced under dash fuse, still no good.
Is there an inline fuse or does relay sound stuffed?
Also is the relay the one closest to the firewall on the right inner guard, directly behind the air cleaner (pretty big black one)?
Thanks guys.
Top
Posts: 129
Joined: Tue Oct 28, 2003 5:03 pm
Location: Sydney

Post by Rough60 »

Check the relay and it is clicking but not power is going to the plugs.
What to check next?
Thanks.
Top
Posts: 129
Joined: Tue Oct 28, 2003 5:03 pm
Location: Sydney

Post by Rough60 »

Just tested the relay and power is running to the relay out when the ignition is turned to on but not to the plugs.
And continuity exists from power out on the relay to the glow plugs when power was off.
I'm a bit stumped, any ideas?
Thanks.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 20 guests