Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
transfer case gearing
Moderators: toaddog, Elmo, DUDELUX
transfer case gearing
How many teeth does the standard toyota gear have. The gear I'm talking about is the gearbox shaft gear in the transfer case. The one that sits in front of the PTO drive gear.
Marks gears need to have relieving on the bottom of the t/case for the idler gear, as they are larger than the standard diameter idler. Marks gears are quite coarse compared to the standard, that is they have less teeth.
there is two different gears in a cruiser split t/case, (for the large idler 36mm? and small 32mm? not sure if thats right) cant remember which has how many teeth on the input.....
Just thought of something else, i am pretty sure marks hi and low range gears come with roller bearings rather than bushes.
there is two different gears in a cruiser split t/case, (for the large idler 36mm? and small 32mm? not sure if thats right) cant remember which has how many teeth on the input.....
Just thought of something else, i am pretty sure marks hi and low range gears come with roller bearings rather than bushes.
My 60 series rebuild....
http://www.outerlimits4x4.com/ftopic103004.php&highlight=
http://www.flyology.com
2006 CRV Sport (wifes car)
http://www.outerlimits4x4.com/ftopic103004.php&highlight=
http://www.flyology.com
2006 CRV Sport (wifes car)
What ratios are available standard for the 60 split case ive been looking on ih8mud and the yanks rekon theres the 1.996 to 1 low and a 2.2?? to 1 and a 2.4?? to 1..
has anyone come accross these gears in a 60 some say that the lower ratio only come in the bundera and some say that the lower ratio come from the auto 60 ..
theres no real fact to this or if there is i havent found it yet anyone here know the facts..
the marks adaptors site only specify 2 ratios in the 1.9 area and theres bugger all difference between them
has anyone come accross these gears in a 60 some say that the lower ratio only come in the bundera and some say that the lower ratio come from the auto 60 ..
theres no real fact to this or if there is i havent found it yet anyone here know the facts..
the marks adaptors site only specify 2 ratios in the 1.9 area and theres bugger all difference between them
Cheers
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Chris
Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Resident Terrorist
I bought a second hand box and transfer with reduction gears. Its supposed to be 55% low range reduction and 8% high range underdrive (Option 4 on marks website).
Here's a pic of my gearset for you to compare with. You should also be able to read some numbers off the marks gears and ring Marks to check what you have.
Here's a pic of my gearset for you to compare with. You should also be able to read some numbers off the marks gears and ring Marks to check what you have.
Who is online
Users browsing this forum: No registered users and 20 guests