I have the above and am woundering if any one on this list has one from a broken/unused instrument gauge.
Mine works only some times and half the time, it stops ae whatever speed I am doing when it decides to not work.
Have looked to see if it is fixable but have discovered that the chip I require is a TB9213P. So little information on the net about this. Best I can come up with is, it is a micro controller which will need to be programmed anyway so not possiable to fix......
James
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series speed indacuter faulty
Moderators: toaddog, Elmo, DUDELUX
Yes, I know. $400 is very steep for something so small and with soo little in it
Is a new one anyway and the ODO still ticks over so it isn't the sensor.
I have managed to fix it anyway. Pulled it out and attacked it with the soldering iron and a bit of cleaner. Some of the green protective mask has flaked off from the copper tracks and some brown sticky goo has covered the copper traces, but only where the mask is missing. A bit of a clean and resoldering, it now works the best since I have had the car.
James
Is a new one anyway and the ODO still ticks over so it isn't the sensor.
I have managed to fix it anyway. Pulled it out and attacked it with the soldering iron and a bit of cleaner. Some of the green protective mask has flaked off from the copper tracks and some brown sticky goo has covered the copper traces, but only where the mask is missing. A bit of a clean and resoldering, it now works the best since I have had the car.
James
penguin13 wrote:I've had mine die twice and it has been the sensor at the gearbox end both times. Over $400 from Toyota - ouch!!
Mike
Who is online
Users browsing this forum: No registered users and 2 guests