Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pajero Snorkel

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 95
Joined: Sat Mar 29, 2008 9:20 am
Location: Australia, Sydney

Pajero Snorkel

Post by Dalluke »

Hey guys installing a snorkel tomorrow on my NH pajero just want some tips on best ways to cut hole etc. Got a snorkel off a 80 series diesel, angles and stuff seem the same so going to try fit it.. Has anyone done a snorkel without the stickon guide... how do you measure it up etc.


Dave
Tow Rig - 2007 76 Series Workmate, 35's, 2in Lift, Locked, Barred with all the Toys. Play Rig - V8 Bobtailed Range Rover, 351 V8, GQ Diffs, HD CV's, Cage, Lockers, 37in BFG Krawlers
Top
Posts: 29
Joined: Tue May 20, 2008 8:17 pm
Location: central coast n.s.w

Post by scott1482 »

hey i have never fitted one but just wondering how much you paid for the snokel and was it from a wrecker just tossing up ether to find one that fits with similar angles or just make one
cheers and good luck
Top
Posts: 95
Joined: Sat Mar 29, 2008 9:20 am
Location: Australia, Sydney

Post by Dalluke »

Hey mate, i picked up an 80 series snorkel and it fit perfectly just made a template out of cardboard and marked it all out, cut the hole (the scary bit) and then pushed it in and mounted it. Make sure you double check your template and use some galv paint on the edges of the hole before snorkel goes in.

The snorkel cost me $50.00 i think
Tow Rig - 2007 76 Series Workmate, 35's, 2in Lift, Locked, Barred with all the Toys. Play Rig - V8 Bobtailed Range Rover, 351 V8, GQ Diffs, HD CV's, Cage, Lockers, 37in BFG Krawlers
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I did this a bit back on early dudlux fitting up a GU snorkle.

I purchased some cheap bolts with the corect thread then cut the heads of em and ground them to a point.
Position the snorkle against the vehicle and a gentle tap marks out all your centres for the holes you need to drill.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests