Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winch stopped working with titan solenoid

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

winch stopped working with titan solenoid

Post by YankeeDave »

my 6 hp motor stopped working for some reason. I can hear the solenoid clicking over but the motor doesnt sound like it's even trying to work

how do i test this? can i assume the solenoid is working as it is clicking across? with multi-meter neg on battery and pos on f1 or f2 on winch motor i get 12V when i click controller to wind out, but nothing when click to wind in.

Am i supposed to get any Volts when i test the A on the motor?

Any ideas???

all connections seem to be ok.
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

More than likely the brushes are stuckout in the winch motor. If the solenoid is clicking pretty much it is working.
Had this happen on one of my winchs with a 6hp and same on a mates with a 6hp. they don't seem to be that well sealed.
Undo the 2 bolts that hold the motor on and tap the end cap off and see if its rust in there and see if the brushs are stuck out.
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

thanx will try that tomorrow
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 6 guests