Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

R series from 3lt surf identification

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

R series from 3lt surf identification

Post by leehamescort »

Bought a low km R series and am 3/4 through putting it into my surf, I was told it was from a 3 litre surf but the box only has one gearshift hole (doesnt have the hole for the transfercase lever in the gearbox housing). Did the 3lt have a topshift transfercase?

i thought all chaindrive transfers where forward shift?

It doesnt effect me other than a small centre console modification as i'm running twin gear driven top shift transfers so i wasn't using the transfer case lever hole in the gearbox anyway.

my thought is it might be a supra box??

cheers
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 86
Joined: Fri Sep 02, 2005 4:48 pm

Post by 904Runa »

Yeah, I think no more topshift cases after late 80s or so in surfs / 4runners.

Was there an electric 4wd setup in surfs at some stage that meant push button low range activation rather than the traditional mechanical lever?
Top
Posts: 17
Joined: Fri Feb 13, 2009 7:23 pm
Location: the kimberley

Post by jaronimo »

Yep you got me with that one, I assumed all surfs had the electric 4wd button on the low range selector which is still a top shift selector,
Ive also got the r series in my runna behind a 2.8 diesel, and that is what that is ADD it came from a 1994 surf

Hey Leehamescort your rear end has a disc conversion correct? could you lend some info to a fellow runna owner?
Top
Posts: 231
Joined: Tue Sep 14, 2004 1:11 pm
Location: Melbourne

Post by leehamescort »

jaronimo wrote:Yep you got me with that one, I assumed all surfs had the electric 4wd button on the low range selector which is still a top shift selector,
Ive also got the r series in my runna behind a 2.8 diesel, and that is what that is ADD it came from a 1994 surf

Hey Leehamescort your rear end has a disc conversion correct? could you lend some info to a fellow runna owner?
Looks like there are two differnent boxes on the surfs/V6 runners, some with a topshift version of the chaindrive transfer.

Jaronimo,
I run a 60 series rear diff now, but the brake conversion is similar.
Its just the subaru caliper conversion so as to keep a cable handbrake with hilux vented front rotors and a flat 8mm mounting plate to suit. Its a very easy conversion.

cheers
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
Top
Posts: 17
Joined: Fri Feb 13, 2009 7:23 pm
Location: the kimberley

Post by jaronimo »

I see
you dont have the old setup still?
I thought maybe you might of wanted to sell it off
I would be interested if you did
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests