I want to change the suspension on my 2001 Jimny.
I keep getting conflicting information.
OME sells a 3 inch lift kit and they say extended brake lines are not necessary and they say changing the castor corrrection arms is not necessary. Several other places say that both are necessary. I want to do this lift right but I'm not sure who to listen to. Any help would be greatly apprreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Jimny suspension questions
OME do NOT sell a 3 inch system (not in australia anyway). if you get a 3 inch system you will need castor bushes and longer lines. also you may have to space your bumpstops down.
Last edited by joeblow on Fri May 29, 2009 8:31 am, edited 2 times in total.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
O.K., first off, I'm not in Austrailia. I'm an American living in Latvia.
(Yeah, I know you never heard of it)
Second, OME does sell 3 inch lifts, check out www.rockyroad.com under the Suzuki Samurai-Jimny section. It is at the very bottom.
They are the ones who told me that I didn't need the extended lines or the front and rear radius arms. Unfortunately the U.S. doesn't get Jimny's so they don't offer alot of parts for them but their information has always been good on everything else. But someone from OME who supplies them should know.
I realize we call different parts by a little different names and what I was actually talking about was the front and rear radius arms. Which I realize different websites call by different names also. Either way, thanks for your time. And by the way, I do have a left-handed screw driver.
(Yeah, I know you never heard of it)
Second, OME does sell 3 inch lifts, check out www.rockyroad.com under the Suzuki Samurai-Jimny section. It is at the very bottom.
They are the ones who told me that I didn't need the extended lines or the front and rear radius arms. Unfortunately the U.S. doesn't get Jimny's so they don't offer alot of parts for them but their information has always been good on everything else. But someone from OME who supplies them should know.
I realize we call different parts by a little different names and what I was actually talking about was the front and rear radius arms. Which I realize different websites call by different names also. Either way, thanks for your time. And by the way, I do have a left-handed screw driver.
OME doesn't make a 3"lift as already pointed out but what Rocky Road does is combine the OME lift with some coil spacers to get added height. You might want to check out www.jimny.se for all things Jimny.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
would be interested to know what shocks they spec for the 3inch kit as the ome jimny shocks will not suit that kind of lift. either way 3 inch lift= castor bushes.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Who is online
Users browsing this forum: No registered users and 11 guests