Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need a Extreeme clutch for GQ TD42 recommendations please
Need a Extreeme clutch for GQ TD42 recommendations please
just got my GQ to make like 170kw at the wheels However my new heavy duty clutch is now slipping and it s only like 3 months 7000km old. Anyway car not for competition will be used as a tow vehicle on the road. what is the biggest and best clutch I can get that is not a brass button . Suggestions anybody especially if you have been through this scenario also as not looking forward to pulling the box out to do the clutch again but alas i must be done looks like mondays job.
The Nissan DGR comp truck has approx 350RWHP and i have a clutch from NPC Performance.
We did had a new allterrain clutch with machined flywheel , first time the Nos was used we smoked the clutch to the rivets with trepadors in a gymkana.
I talked to Nick at NPC and he built me a clutch from a dodge viper, we have raced in at least 10 events since with many recreational trips with and without the NOS with no signs of problems, it acts like a normal clutch and can be slipped.
We use this clutch in rock crawling as well ,so in those situations we are slipping the clutch heaps.
It cost approx 1K but it was over a year ago so it may be dearer now.
That was supply only and you use your flywheel that has to be modded by NPC.
We did had a new allterrain clutch with machined flywheel , first time the Nos was used we smoked the clutch to the rivets with trepadors in a gymkana.
I talked to Nick at NPC and he built me a clutch from a dodge viper, we have raced in at least 10 events since with many recreational trips with and without the NOS with no signs of problems, it acts like a normal clutch and can be slipped.
We use this clutch in rock crawling as well ,so in those situations we are slipping the clutch heaps.
It cost approx 1K but it was over a year ago so it may be dearer now.
That was supply only and you use your flywheel that has to be modded by NPC.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Who is online
Users browsing this forum: No registered users and 129 guests