Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tailshaft

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 47
Joined: Fri Feb 13, 2009 7:21 pm
Location: Newcastle NSW

tailshaft

Post by MY89GQ »

when you do a 4in lift in a gq do turn the tailshaft around i keep getting you have too

any ideas

cheers
www.allaussie4x4.com
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

you will need the slip joint above the cross member or it will hit.
Top
Posts: 47
Joined: Fri Feb 13, 2009 7:21 pm
Location: Newcastle NSW

Post by MY89GQ »

anyone else i keep getting told i have too vibration was not there before :?
www.allaussie4x4.com
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

you pic looks to be a shorty,

if so you will need to adjust pinion angle to cancel out vibrations, so either longer lower links, or adjustable upper, its uo you you which way you go, but there is more adjustment in adjustable upper,

we have just been through this in a shorty,
Top
Posts: 87
Joined: Mon Apr 30, 2007 12:57 pm
Location: Lower Hunter Valley NSW

Contact:
Contact bludgerswife

Post by bludgerswife »

Thanks for your reply, it's definitely a LWB so does anyone know if the same applies as ozy1 has stated for a swb? The vibration is coming from that area.

Cheers
Proud Owner of All Aussie 4x4
Full Time Nerd at Complete Website Solutions
Proud Owner of Tassie 4wd
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

So if your question is do I need to turn tailshaft to clear crossmember on drop then yes with nearly any aftermarket longer shock.

If its a question re vibration then that may also come just from the lift. A few reasons but main one is the uni bearings running thru a larger arc . Try giving a GOOD grease job.

Bazzle
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 12 guests