Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lifted gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 51
Joined: Sat Nov 22, 2008 6:22 pm
Location: maryborough

lifted gq

Post by pom300 »

since ive lifted my gq again with fresh 6''coils
it sounds like or feels like a vibration in the rear ?
i had to put 1'' coil spacers in it to bring it up level with the front
it didnt do the vibration before the spacers were in so im wandering if i should space the gearbox down a bit because i might of gone to far past the point of niceness of the uni's or something these bloody gqs are sensitive things.
Posts: 76
Joined: Thu Sep 25, 2008 3:18 pm
Location: brisbane

lifted

Post by fatsogq »

mate my lwb gq is lifted 4" and it vibrated like hell,i've just put 16mm longer bottom control arms in(300 from hobzees in vic,much stronger than originals to) and its much better but its still there, next move is adjustable upper control arms (will be fitting them 5mm shorter than standard so as to rotate the diff and correct the pinion angle) hope thiss helps mate :)
Posts: 76
Joined: Thu Sep 25, 2008 3:18 pm
Location: brisbane

lifted

Post by fatsogq »

ps i take it you've fitted adjustable panhards to?
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

As fatso said, you have bad pinion angles. Even with new uni's, you'll get this vibration until you rotate the diff forward to match the tailshaft/gearbox output angle.
Posts: 51
Joined: Sat Nov 22, 2008 6:22 pm
Location: maryborough

diff angle

Post by pom300 »

thanks fellas for the info yeh ive got adjustable panhards,i tried 10 mm spacers under the gearbox and it fixed it ,i thought about adjustable arms
and that but my pinion looks okay atm.
Post Reply

Who is online

Users browsing this forum: No registered users and 74 guests