Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I plan on running a coil setup like this on my rig and am after a spring like the one pictured to use with retainers on my suzuki. Just wondering where i can get some really soft ones as the car will only be about 800kg's.
Give Graeme a ring or send him a pm because i think hes got some at his house that he was going to put on his zook but never used because he got the coil kit.
What i'am after is a spring that can be extended and compressed quite a bit whilst being retained at the diff end and the chassie mount end.
Spring width isnt really important as i will be making the mounts but i need a soft-ish spring as there will be next to no weight on the rear of the car and i would like it to have a fair amount of flex.
ive never heard of any issues when extending a coil spring.
so you just need a long spring with a light rate?, so what about hi lift springs to suit a coily sierra or wrangler.