I have just picked up 2 heavy duty outback idea steel recovery plates
(http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0397752687)
The front drivers side is a straight swap with the nissan hook, what is the best way to fit the passenger side, the holes are pre drilled on the inside of the chassis rail but directly on the other side there is a body mount so you cant drill straight through and fit crush tubes and the chassis rails are closed of at the ends so I cant get a tapped steel plate behind it!!!
Suggestions please, will this plate be usable on the GU, (I had 2 on my GQ and they were great) as I would prefer 2 front recovery points.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU front recovery points
That dudes on Patrol Forum, he is explaining here and will put photos up.
PM BIGGQ and he can make you a member on Patrol forum, heaps of good info there.
http://www.patrol4x4.com/forum/showthread.php?t=32690
PM BIGGQ and he can make you a member on Patrol forum, heaps of good info there.
http://www.patrol4x4.com/forum/showthread.php?t=32690
KK Cherokee with fats
Who is online
Users browsing this forum: No registered users and 3 guests