Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fuel pressure regulator
fuel pressure regulator
hey
does anyone no how to test if my coolant temp sensor is working correctly.
i'm talkin bout the one that goes to the ecu.
EDIT:name change, formerly - coolant temp sensor
does anyone no how to test if my coolant temp sensor is working correctly.
i'm talkin bout the one that goes to the ecu.
EDIT:name change, formerly - coolant temp sensor
Last edited by me217 on Wed Jun 10, 2009 7:06 pm, edited 1 time in total.
me217
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
Yep, that's exactly it....
You need a multimeter, an accurate thermometer, a sauce and some water...
Pop the saucepan on the stove, put about 5 cm of water in the saucepan, Connect one lead from the multimeter to the terminal on the CTS and the other either to the second terminal (if it has two) or the body of the sensor.
pop the thermometer in the water check the water temp against the resistance, turn the stove on and check the sensor throughout the temperature range given on the chart.
P.S. It's not very often that a sensor is faulty.
Good luck
Dan
You need a multimeter, an accurate thermometer, a sauce and some water...
Pop the saucepan on the stove, put about 5 cm of water in the saucepan, Connect one lead from the multimeter to the terminal on the CTS and the other either to the second terminal (if it has two) or the body of the sensor.
pop the thermometer in the water check the water temp against the resistance, turn the stove on and check the sensor throughout the temperature range given on the chart.
P.S. It's not very often that a sensor is faulty.
Good luck
Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Make sure you suspend the sensor in the water, if it touches the actual container you will get surface transmisson and it will not be acurate. Just like testing a thermostat.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
i did it in the engine today and it was all very close to the correct numbers, as i have a accurate temp gauge in the car. but i found out that the fuel pressure regulator is leaking a fair bit through the vacuum hose so thats the problem.
so does anyone no where i can get a new one from. cause my sierra is runnin really rich atm.
so does anyone no where i can get a new one from. cause my sierra is runnin really rich atm.
me217
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
looked around the wreckers and they didnt wanna sell parts off the engine and repco had nuttin, havnt had a look at genuine yet
me217
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
1985 suzuki mighty boy : mods, f8b
1990 toyota mr2 gt import : mods, turbo timer, short shifter, 2.5" exhaust
1992 suzuki sierra : mods, g16b mpfi, 235's/75, snorkel & lift on the way.
Who is online
Users browsing this forum: No registered users and 7 guests