Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4" lift on a "09" hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 37
Joined: Sun Jan 29, 2006 9:34 pm
Location: winchelsea,vic

4" lift on a "09" hilux

Post by rangiedan »

im am looking at getting a new hilux and want a 4" lift on it or bigger , has any one done this or no anything about it, i have been priced $2600 for a 4" it sounds good to me it includes drop down brackets
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

4" drop bracket lift is only for posing...not for offroading.

you do not gain much clearance, actually you gain nothing other than what the tyres will give you.

yeah, its not a bad price, but I have heard people mention that they feel like the front end is weaker after fitting these kits.

You are much better off going a decent 3" lift kit and some 33's....that way you will gain 6" more clearance than standard under the front diff, whereas with a drop bracket lift you will only be gaining 3" under the front diff that the tyres (if running 33's) will give you.

Ive also heard of steering components wearing quicker with a drop bracket lift.

for more info head over to newhilux.net full of new model hilux enthusiasts.
[url]http://www.monsterrides.com.au[/url]
Posts: 826
Joined: Mon Mar 20, 2006 1:08 pm
Location: Redcliffe

Post by berad »

Cv's would also go bang more often with some much angle on them.

More than 3inch in most cases is nothing but silly imo.
BBP Offroad
Boondall Backyard Performance

They call me the MR. throw cash at shiz til its comp specccccc
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

berad wrote:Cv's would also go bang more often with some much angle on them.

More than 3inch in most cases is nothing but silly imo.
Yes 3" is the absolute maximum that these cv's can handle. anything more requires a drop bracket.

you just have to weigh up the cost versus the effectiveness of either option.
[url]http://www.monsterrides.com.au[/url]
Posts: 37
Joined: Sun Jan 29, 2006 9:34 pm
Location: winchelsea,vic

Post by rangiedan »

im not looking at taking it off road im seting it up for traveling, the lift is mainly to make it look better, i have a jeep tj for my off roading, ive heard the steering can wear and get sloppy with off roading in the new hiluxs is this true? i mainly want a reliable car that i can take on long trips around the country,so im setting up a hilux and i dont want it to look low and soft
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

My steering is fine with 50,000km on it with 3" lift and 33's being there since day one....

yeah, go for it if the snake kit is the option.

Have a look at Ultimate Suspension......they are the ones that make the 4" snake kit for Snake.....but they sell their own 3.5" kit that is better built.

just something to look into before you bite the bullet.
[url]http://www.monsterrides.com.au[/url]
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

rangiedan wrote:im not looking at taking it off road im seting it up for traveling, the lift is mainly to make it look better, i have a jeep tj for my off roading

aahaa....................it all makes sense now! ;)
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 82
Joined: Mon Nov 05, 2007 3:20 pm
Location: Geebung QLD

Post by Unidriveshafts »

I'm running a superior 4" lift in mine, 33" MTZs & 1" diff drop spacer. I think for memory the kit cost about $2300, look on superiors website for pricing. I've found it to be a very good kit with a good amount of travel for an ifs vehicle and rides well on road 2. Hope this helps, Steve.
UNIVERSAL DRIVESHAFT SERVICES -Tailshaft Repairs, Custom Mod's, Balancing, NTN CV's & Axles (07) 3265 3397
Posts: 363
Joined: Mon Apr 17, 2006 8:21 pm
Location: melbourne

Post by mmaaxx »

Unidriveshafts wrote:I'm running a superior 4" lift in mine, 33" MTZs & 1" diff drop spacer. I think for memory the kit cost about $2300, look on superiors website for pricing. I've found it to be a very good kit with a good amount of travel for an ifs vehicle and rides well on road 2. Hope this helps, Steve.
No offence steve but that Superior kit is pushing the IFS past its limits IMO.....the 1" drop brackets dont do much, they give you half inch worth of reprieve on the cv angles, and are not a tru 1 " drop because they rotate the front diff forwards because its impossible to lower the rear diff mount due to its design......so you'd have the clearance of a 3" anyway under the front diff due to the brackets and the cv angle of a 3.5" lift.....too sever if you ask me.

Your inner cv boots would be touching for sure.

Mine are "just" touching sitting at a full 3" .

I agree, the other components of the kit are great, but its just pushing it too far. If there was a way to lower the rear diff mount a full inch, that would be ideal and you could run a full 4" lift with the cv angle of a 3".....in a perfect world. :roll:
[url]http://www.monsterrides.com.au[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests