Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Valve Clearances

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 6
Joined: Mon Feb 13, 2006 7:43 pm
Location: Bathurst NSW

Valve Clearances

Post by keano »

Just wondering if anyone can tell me inlet and exhaust clearances. Thanks any help would be appreciated.
Top
Posts: 264
Joined: Wed Aug 22, 2007 1:24 am
Location: Perth

Post by nabstud »

Maybe some info on vehicle/engine/model/year may help...
Top
Posts: 6
Joined: Mon Feb 13, 2006 7:43 pm
Location: Bathurst NSW

Post by keano »

Yes That prob would be a good idea. A GQ TD42 1994. Thanks
Top
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

11 thou inlet. 15 thou exhaust
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Is that hot or cold valve clearance, looking to do this very soon also.

Cheers, Dano.
Top
Posts: 6
Joined: Mon Feb 13, 2006 7:43 pm
Location: Bathurst NSW

Post by keano »

Awesome mate thanks heaps cheers
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

hot , get it red hot first then do them as quickly as possible
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 158
Joined: Sun Apr 26, 2009 2:52 pm
Location: Nowra

Contact:
Contact drifter** *

Post by drifter** * »

do them cold.
Top
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Post by turbo gu »

drifter** * wrote:do them cold.
What spec??

I had a spec years ago from nissan but lost it?
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

im interested as to the comment on doing them cold.the manual does give a cold spec iirc.. everyone in the dealer i am at does them hot , do you do them cold at home because of the time taken to do them if you have not done about 400,000 of them. each 4.2 gets it every 20,000 as part of service.
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

ill post it up later on today when i get to work from the y60 manual. :P strait from the bible
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 158
Joined: Sun Apr 26, 2009 2:52 pm
Location: Nowra

Contact:
Contact drifter** *

Post by drifter** * »

sorry, my mistake I was thinking of shims, not adjustable tappets. your right do them hot.
Top
User avatar
sw1
Posts: 297
Joined: Mon Mar 15, 2004 10:06 am
Location: around the place

Post by sw1 »

Tomo_89 wrote:11 thou inlet. 15 thou exhaust
??
ifaik is 14 thou for both
prehaps a gq td42 is different, however i doubt it


edit: quick look in the gu genuine manual page em-176 states 0.35mm or 14thou, done hot. as i said i highly doubt thats going to be different for a gq td42
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Top
User avatar
sw1
Posts: 297
Joined: Mon Mar 15, 2004 10:06 am
Location: around the place

Post by sw1 »

page em-95 in the genuine nissan gq manual states 0.35mm aswell

so no its not different at all
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Top
Posts: 76
Joined: Sat Mar 21, 2009 10:47 am
Location: Cairns, QLD

Post by neilpatrol »

All TD42 engines are 13 thou hot, No nissan engine likes cold tappet settings.
Top
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

If you run them at 12thou it shuts them up and gives a little performance gain.
Top
Posts: 76
Joined: Sat Mar 21, 2009 10:47 am
Location: Cairns, QLD

Post by neilpatrol »

You'll find that if you have adjusted the valve lash to 13 thou and they are still noisy your valve stems have worn the rockers and they will need to be built up and machined. 12 thou isn't recommended as factory have set them at 13 thou for a good reason.
Top
Posts: 145
Joined: Wed Sep 27, 2006 4:13 am
Location: Abbotsford, BC, Canada

Post by canuck »

Tappered feeler gauge also helps to set them right, especially if you have divits on the rockers.
Top
Posts: 6
Joined: Mon Feb 13, 2006 7:43 pm
Location: Bathurst NSW

Post by keano »

Thanks heaps. i was hoping to do them cold as i have tapper cover off already but doing them hot is not a problem anyway. I Appreciate everyone advice Thanks
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 8 guests