4G54 question

Post by **65gq** » Thu Jun 11, 2009 11:56 am

i got a triton with a 4G54 with 5 speed and its allmost dead
in the shed i have a 4G54 from an auto box

my question is :- will the auto motor bolt up to the 5 speed

i was told there are different so im gessing the crank is different to bolt the flex flate on

cheers darryl

Post by **-Scott-** » Thu Jun 11, 2009 8:29 pm

I believe the difference is in the bell housing stud/bolt pattern. The crankshaft patterns should be the same.

Post by **steverisingsun** » Thu Jun 11, 2009 8:45 pm

The lower bellhousing bolts are further apart on the manaul engines. The Sigma came with series one and two versions. The Pajero often had series two head on a series two type block.
Steve

Post by **65gq** » Thu Jun 11, 2009 9:17 pm

so what you are saying to put my auto motor up to my 5 speed i need to get the other bellhousing

is this what your saying

cheers darryl

Post by **steverisingsun** » Thu Jun 11, 2009 11:16 pm

65gq wrote:so what you are saying to put my auto motor up to my 5 speed i need to get the other bellhousing

is this what your saying

cheers darryl

No the bellhousings for the auto and manual are differant

Post by **65gq** » Fri Jun 12, 2009 10:39 pm

thanks for your help on this

Outer Limits 4x4 Board

4G54 question

4G54 question

Who is online